Recherche Barco

Notifications myBarco

Non lu

Lu

Vous n'avez aucune notification.
Produits

How to verify my ClickShare CX-/C-series Gen1 Base Unit is pre-installed with firmware version 2.10 or above?

Numéro d'article: [9744]

Applicable à

Check the printed REV number on the backside of the packing box containing the Base Unit and compare it with the REV numbers mentioned in table below.


 

Delivered with firmware version 2.10 or above pre-installed
Base UnitREV number
CX-50 Gen113 and higher
CX-30 Gen112 and higher
CX-20 Gen112 and higher
C-10 Gen104 and higher
C-5 Gen104 and higher

 

Info! 
All Gen2 variants are pre-installed with a firmware version higher than 2.10.
To identify your ClickShare Base Unit model, see KB2865.


Related Articles

Propriétés

Dernière mise à jour 2 sept. 2025

Aucune solution trouvée ?

Assistance téléphonique

Notre help-desk vous permet d'accéder à un support téléphonique rapide. Une équipe de techniciens support expérimentés se tient à votre service pour toute assistance professionnelle.