Produits

When using the HDMI input on the CX-50 in standby mode, the HDMI input is not visible on the screen

Numéro de l'article: [4797] - Ancien code: [11516]

Applicable à

Issue:

On the CX-50, using the HDMI™ input after the Base Unit goes into standby results in the HDMI™ input not appearing on the screen.

This issue is only noticed with the ClickShare CX-50 Base Unit.

Solution:

Upgrading your ClickShare Base Unit to firmware version 2.13 or higher will fix this issue.

Propriétés

Dernière mise à jour 19 avr. 2024