Précédent
Software
E2 S3-4K EX Firmware (Release 9.2.6373)
- Version
- v9.2.2.0
- Taille du fichier
- 400 MB
- Date de sortie
- 24 Nov 2025
- Disponible pour
- E2 Gen 2 , Série E2 VR , E2 Gen 2 BTO , E2 (existant) , Tri-combo Ex , Ex , S3-4K BTO , S3 Tri-combo , S3-4K Jr , S3-4K , S3 Standalone , E2 Jr , E2 , E2 Tri-combo , S3 Tri-combo Gen 2 , S3-4K Jr Gen 2
- Langue
- anglais
- Somme de contrôle SHA256
- de6c2508eb9d0a6fc124e8b3901cd3dfa29e29f4d5cf89772513e2cec4a7e594
Notes de version
E2 S3-4K Ex Version 09.02.6373
Please read the What's New file after downloading this bundle for more detailed information about these features.
IMPORTANT NOTES
Please read the What's New file after downloading this bundle for more detailed information about these features.
IMPORTANT NOTES
- Use the following with this release of EM firmware.
- E2/S3/EX/ImagePRO-4K Operating System: Revision 3.1.6 or higher
- Event Master Toolset (Windows): Revision: 9.2 (Build 68800) or higher
- Event Master Toolset (Mac): Revision: 9.2 (Build 68800) or higher
- Event Master Toolset (Linux): Revision: 9.2 (Build 68313) or higher
- DisplayPort 1.2 input configurations, DisplayID Block usage.
- Backup and restore operations due to certain LAN configurations.
- Atomos Shogun not creating valid CRC streams per SMPTE ST-2081/2082.
- In conjunction with OS 3.1.6, support the updated CPU module that will ship with newly manufactured E2 Gen2 and S3 Gen2 units. Units that ship with this updated CPU will block downgrading to an earlier firmware build.
- Added back-tracing to System logs to help identify where any suspected crash has occurred. NOTE: This addition is supported in all models except E2 Gen1 and S3 Gen1 units.
Historique des versions
Télécharger
Somme de contrôle SHA256
6921d05084e2f94f2a3700ff7cd50f96bed5f888e4d6f5941d637bb3b0de22d7
Notes de version
E2 S3-4K Ex Version 09.02.6318
Please read the What's New file after downloading this bundle for more detailed information about these features.
IMPORTANT NOTES
Please read the What's New file after downloading this bundle for more detailed information about these features.
IMPORTANT NOTES
- Use the following with this release of EM firmware.
- E2/S3/EX/ImagePRO-4K Operating System: Revision 3.1.5 or higher
- Event Master Toolset (Windows): Revision: 9.2 (Build 68313) or higher
- Event Master Toolset (Mac): Revision: 9.2 (Build 68313) or higher
- Event Master Toolset (Linux): Revision: 9.2 (Build 68313) or higher
- DisplayPort 1.2 input configurations, DisplayID Block usage.
- Backup and restore operations due to certain LAN configurations.
- Atomos Shogun not creating valid CRC streams per SMPTE ST-2081/2082.
- EM: Boot-up issue, on Gen2 video processors, where some of its populated slots showed no card detected. Requires OS 3.1.5.
- EM: E2 in PGM only mode would not show still images in the background for canvas links 5-8 and 9-16.
- EM: Removed outdated JQuery libraries from the internal WebApp.
- ALL: The log file now prints genlock change events i.e., signal rate change or loss, user establishes lock (re-lock)
Télécharger
Somme de contrôle SHA256
302ba883338615ab18de3fb6c9a7962ea45779a9b472b93cc74b2dc670a98cda
Notes de version
E2 S3-4K Ex Version 09.02.5980
Please read the What's New file after downloading this bundle for more detailed information about these features.
IMPORTANT NOTES
Please read the What's New file after downloading this bundle for more detailed information about these features.
IMPORTANT NOTES
- Use the following with this release of EM firmware.
- E2/S3/EX/ImagePRO-4K Operating System: Revision 3.1.1 or higher
- Event Master Toolset (Windows): Revision: 9.2 (Build 68313) or higher
- Event Master Toolset (Mac): Revision: 9.2 (Build 68313) or higher
- Event Master Toolset (Linux): Revision: 9.2 (Build 68313) or higher
- DisplayPort 1.2 input configurations, DisplayID Block usage.
- Backup and restore operations due to certain LAN configurations.
- Atomos Shogun not creating valid CRC streams per SMPTE ST-2081/2082.
- IP4K: Circle Alignment Test Pattern options, including LED Mode, were missing from the Front Panel menu.
- EM: Rare but possible crash in unstable network environment.
- EM: Inputs from a daisy-chained EX were not visible in the multiviewer.
- EM: Single Layers assigned to a Screen Destination within a Super Destination were changing layers.
- EM: Screen Destinations that use more than one row of canvas links could show an artifact when a Layer with an upscaled, high-contrast image was positioned above where the canvas rows meet.
- EM: Diagnostic error message on S3 with one PSU.
- EM: JSON armUnarmDestination followed by allTrans resulted in transitioning unarmed Destinatations.
- EM: Any SuperLayer(s) assigned to Super Destination(s) can either act Globally or Locally.
- EM: User preference for "Destination Tabs add on the Right" upon creation.
- EM: Backup files exported from the WebApp now appends the date and time to the filename’s characters.
- EM: The HDCP status for supported output connectors is now available when an output connector is selected.
- EM: Tally indications in the Multiviewer UMDs and GUI’s Programming Page for Multi-Operator use (Gen2 MVR card required).
- EM: Multi-Select Destination Tabs to add them to Programming Layouts by using Ctrl+Click (Mac: Cmd+Click).
- EM: Backgrounds as Source (Inputs Tab) now has New Source and Copy Source buttons.
- EM: Custom Format’s VESA calculator section now defaults to having the Reduced Blanking Version 1 option applied.
- EM: For Aux Destinations the Aux Scaling Mode is now defaulted to "Custom" instead of "All."
- EM: JSON Commands added, changeSuperDestContent and changeSuperAuxContent
- IP4K: Pan/Zoom controls are now readily accessible from the "LED Setup" menu's Image Sizing Controls.
Télécharger
Somme de contrôle SHA256
d0f35c6550da9fda0ced7f794f92a258f1988b2e5bf65930ba2161dfe63f7b3b
Notes de version
E2 S3-4K Ex Version 09.01.5610
Please read the What's New file after downloading this bundle for more detailed information about these features.
IMPORTANT NOTES
Please read the What's New file after downloading this bundle for more detailed information about these features.
IMPORTANT NOTES
- Use the following with this release of EM firmware.
- E2/S3/EX/ImagePRO-4K Operating System: Revision 3.1.1 or higher
- Event Master Toolset (Windows): Revision: 9.1 (Build 67065) or higher
- Event Master Toolset (Mac): Revision: 9.1 (Build 67065) or higher
- Event Master Toolset (Linux): Revision: 9.1 (Build 67065) or higher
- DisplayPort 1.2 input configurations, DisplayID Block usage.
- Backup and restore operations due to certain LAN configurations.
- Atomos Shogun not creating valid CRC streams per SMPTE ST-2081/2082.
- IP4K: When the output format was set to 1080i the Front Panel Status showed the output format as 1080p.
- EM: Multi-Op: Preset recall would deselect Aux destination(s) under control of other operator(s).
- EM: Multi-Op: Preset recall of Super Dests were only changing for the Super Operator and not a Normal Operator.
- EM: Unable to select a 5760x1080 still store image as a backup for Background Input with the same resolution.
- EM: Sizing Adjustment of an Input source's V Pos while the Layer Position Center of Destination option is turned on would display the starting position incorrectly.
- EM: With the System Native Rate less than or equal to 30Hz, 6G-SDI inputs, which require 4K capacity were allowed to be used in DL scaling resources and resulted in other related issues.
- EM: Ex connected via CXP I/O card was incorrectly causing a "Global Link resources exceeded" error when the Global Link switch was toggled.
- EM: Certain linked chassis configurations would experience "lag" in the GUI when using the mouse to position a layer on PVW.
- EM: I/O configured on daisy-chained EX chassis were not showing good video in the host chassis' MVR windows.
- EM: When multiple Screen Destinations had a test patterns on, then turned off, the UMD notification would still show the test pattern was on.
- EC: Quickly changing the function of the assign bus(es) caused the EMTS to crash.
Télécharger
Somme de contrôle SHA256
1f79d67dfc70c8807447c3195e786c1de1608170f41be6c04278a761a6dbbee6
Notes de version
E2 S3-4K Ex Version 09.00.5614 (Maintenance Release)
Please read the What's New file after downloading this bundle for more detailed information about these features.
IMPORTANT NOTES
Please read the What's New file after downloading this bundle for more detailed information about these features.
IMPORTANT NOTES
- Use the following with this release of EM firmware.
- E2/S3/EX/ImagePRO-4K Operating System: Revision 3.1.1 or higher
- Event Master Toolset (Windows): Revision: 9.0 (Build 65399) or higher
- Event Master Toolset (Mac): Revision: 9.0 (Build 65399) or higher
- Event Master Toolset (Linux): Revision: 9.0 (Build 65399) or higher
- Added additional hardware drivers, supporting new components used in manufacturing due to worldwide component shortages. No other functionality has changed in this release.
Télécharger
Somme de contrôle SHA256
422d0fc8201eb8b89797a27469be64b26425c71852453d1d621026735169ebfd
Notes de version
E2 S3-4K Ex Version 08.02.5613 (Maintenance Release)
Please read the What's New file after downloading this bundle for more detailed information about these features.
IMPORTANT NOTES
Please read the What's New file after downloading this bundle for more detailed information about these features.
IMPORTANT NOTES
- Use the following with this release of EM firmware.
- E2/S3/EX/ImagePRO-4K Operating System: Revision 3.1.1 or higher
- Event Master Toolset (Windows): Revision: 8.2 (Build 63872) or higher
- Event Master Toolset (Mac): Revision: 8.2 (Build 63872) or higher
- Event Master Toolset (Linux): Revision: 8.2 (Build 63872) or higher
- Added additional hardware drivers, supporting new components used in manufacturing due to worldwide component shortages
- Fix an issue with MVR as Source in E2 to EX linked systems not showing on Aux destinations configured on the EX chassis.
- Fix an error of incorrect calculations for power load/PSU redundancy that causes a warning message to pop up in the GUI.