This article provides clear, step-by-step instructions for setting up ClickShare Hub Core and ClickShare Hub Pro with the necessary hardware, including a Standalone Peripherals. It outlines hardware requirements, connection diagrams, and detailed configuration guidelines for installation personnel.
About Standalone Peripherals
Standalone peripherals have speaker(s), microphone(s) and camera(s) embedded.
🔗 https://www.barco.com/en/products/clickshare-conferencing-collaboration/room-systems-video-conferencing/compatibility-and-certification
ClickShare Hub Pro with Standalone Peripheral
Hardware requirements
- ClickShare Hub Pro Base Unit
- Control Panel
- In-box 10m USB-C cable labelled "Source" and "Display" (provided with the Control Panel)
- In-box USB-C Cable Lock
- Standalone Peripheral (e.g. Sennheiser TeamConnect Bar M)
- Up to two regular (non-touch) displays
- ClickShare Hub Power Supply Unit
- USB-A and USB-C cables
- HDMI™ cables
- Ethernet cable
Connection setup overview
-
Position devices
-
Place the Hub Pro and Control Panel to the desired position in the meeting room.
-
Position the Standalone Peripheral according to room acoustics.
-
-
Connect external displays to the Hub Pro
-
Use HDMI™ cables to connect the HDMI™ In of displays to the HDMI™ 1 and HDMI™ 2 ports on the Hub Pro.
-
-
Connect Control Panel to the Hub Pro
-
Use the in-box 10M USB-C cable, connect the Display endpoint to the Control Panel (see also KB15484), and the Source endpoint to the purple-circled USB-C port on Hub Pro.
-
Use the in-box USB-C Cable Lock to increase the contact between the cable and the port, ensuring increased stability during data transfer.
-
-
Connect Standalone Peripheral to Hub Pro
-
If the Standalone Peripheral supports USB-C connectivity
Use a USB-C cable to connect USB-C port on the Standalone Peripheral to the USB-C port on the Hub Pro.
-
If the Standalone Peripheral supports USB-A connectivity
Use a USB-A cable to connect the USB-A port on the Standalone Peripheral to the USB-A port on the Hub Pro.
-
-
[Optional - Wired video input connection] Connect an external device to the Hub Pro.
-
External device support DisplayPort Alt Mode
Use a USB-C cable to connect the USB-C port of the device to the USB-C port of the Hub Pro
-
External device does not support DisplayPort Alt Mode
Use an HDMI™ cable to connect the HDMI™ Out port of the device to the USB-C input convertor connected to the rightest USB-C port of the Hub Pro
-
-
Network connectivity
-
Connect Hub Pro to the LAN network using Ethernet cable.
-
-
Power connection
-
Plug the USB-C Power Supply Unit (100W or 180W) into the power USB-C port of the Hub Pro. See KB15636.
-
ClickShare Hub Core with Standalone Peripheral
Hardware requirements
- ClickShare Hub Core Base Unit
- Control Panel
- In-box 10m USB-C cable labelled "Source" and "Display" (provided with the Control Panel)
- In-box USB-C Cable Lock
- Standalone Peripheral (e.g. Sennheiser TeamConnect Bar S)
- One regular (non-touch) display
- ClickShare Hub Core Power Supply Unit
- USB-A and USB-C cables
- HDMI™ cables
- Ethernet cable
Connection setup overview
-
Position devices
-
Place the Hub Core and Control Panel to the desired position in the meeting room.
-
Position the Standalone Peripheral according to room acoustics.
-
-
Connect external display to the Hub Core
-
Use an HDMI™ cable to connect the HDMI™ In of the display to the HDMI™ 1 port on the Hub Core.
-
-
Connect Control Panel to the Hub Core
-
Use the in-box 10M USB-C cable, connect the Display endpoint to the Control Panel (see also KB15484), and the Source endpoint to the purple-circled USB-C port on Hub Core.
-
Use the in-box USB-C Cable Lock to increase the contact between the cable and the port, ensuring increased stability during data transfer.
-
-
Connect Standalone Peripheral to Hub Core
-
If the Standalone Peripheral supports USB-C connectivity
Use a USB-C cable to connect USB-C port on the Standalone Peripheral to the USB-C port on the Hub Core.
-
If the Standalone Peripheral supports USB-A connectivity
Use a USB-A cable to connect the USB-A port on the Standalone Peripheral to the USB-A port on the Hub Core.
-
-
[Optional - Wired video input connection] Connect an external device to the Hub Core.
-
External device support DisplayPort Alt Mode
Use a USB-C cable to connect the USB-C port of the device to the USB-C port of the Hub Core
-
External device does not support DisplayPort Alt Mode
Use an HDMI™ cable to connect the HDMI™ Out port of the device to the USB-C input convertor connected to the rightest USB-C port of the Hub Core
-
-
Network connectivity
-
Connect Hub Core to the LAN network using Ethernet cable.
-
-
Power connection
-
Plug the USB-C Power Supply Unit (100W or 180W) into the power USB-C port of the Hub Core. See KB15636.
-
