Précédent
Hodr Cinemascope
Hodr Cinemascope has a pleasing calm uniform image and is designed for large screens or high ambient light environments.
- Theater & Media Room Series
- 5K UHD Resolution (5,120 x 2,160)
- 3-Chip DLP
- Up to 5,600 ANSI Lumens
Prix catalogue:
(Hors TVA, droits de douane et frais de transport)
Prix non disponible
R9010312
Hodr CinemaScope
Hodr Cinemascope is Njord Cinemascope’s little brother and means warrior. Hodr Cinemascope delivers perfect cinematic colors, supporting DCI/P3 color gamut, coupled with a high-capacity 2.37:1 aspect DLP engine. Its exceptional design allows a cinemascope film to be shown without requiring an anamorphic lens.
Our Hodr Cinemascope features a pleasing and uniform image with the power light up medium to large screens, whilst delivering an unbelievably detailed image with spectacular color fidelity for an unmatched experience that will delight even the most discerning clients.
Single Step Processing SSP™
Pulse is a hardware and software based platform that simplifies the signal allowing it to transmit from source to screen much faster and more efficiently. We use an advanced image processing technique to display the image on the screen without any artefacts and with the lowest possible processing lag (<20ms with all image processing), this is made possible by our Single Step Processing (SSP™).
State of the art electronics
All new Pulse electronics have been designed to process 4K with HDMITM 2.0a and HDCP 2.2 and the optical engine utilises the very latest 0.9" DMD DLP chipset, delivering 5,120 x 2,160 pixels to screen.
Hodr CS also features HDR, motorised lenses and Barco’s unique RealColor processing, enables simple and accurate calibration to any desired color standard or white point.
Building Blocks
Hodr Cinemascope offers 5K UHD resolution (5,120 x 2,160) for superb image quality. Thanks to its modular design of only five building blocks, Hodr CS is easy to service.
Laser Light Source
Outstanding image quality also requires an exceptional light source which is why we designed Hodr CS with a brand new laser engine, significantly improving image uniformity (95%) over its predecessor. Hodr CS uses custom selected lasers to secure that we can deliver DCI/P3 color gamut.
Lasers last longer than traditional projector lamps, are not as fragile and offer nearly instant on/off.
Caractéristiques
Télécharger la fiche techniqueSpécifications générales
- Type de projecteur
- Three chip DLP
- Durée de vie de la source lumineuse
- Up to 20,000
- CLO (flux lumineux constant)
- Yes
- Coupe-flux optique
- Yes
- Technologie
- 3 x 0.90" DMD™ with sealed core
- Serveur Web intégré
- Yes
- Résolution
- 5,120 x 2,160 (5K UHD)
- Diagnostics
- via Prospector web interface
- Rapport d'aspect
- 2.37:1 (CinemaScope)
- Source de lumière
- Laser phosphor
- Luminosité
- Up to 5,600 ANSI Lumens Dimable to 3,000 lumens
- Rapport de contraste
- 20,000:1 (with DynaBlack enabled), 2,000:1 Sequential 600:1 ANSI
- Uniformité de la luminosité
- >90%
- Résolutions d'entrée
- HDMITM:
Up to 4,096 x 2,160 @ 24/25/30/50/60Hz
DisplayPort (Single Input):
Up to 4,096 x 2,160 @ 24/30/50/60Hz
via Optional Quad DP1.2 Input Card
DisplayPort (Layout Mode: 2 x 2) *:
Up to 1,920 x 1,080 @ 120Hz
Up to 2,048 x 1,080 @ 120Hz
DisplayPort (Layout Mode: 4 x 1) *:
Up to 960 x 2,160 @ 120Hz
* Specialist GFX cards may be required
- Gamme d'objectifs
- (R9801661) - TLD+ (0.41:1) - 90 Degree Lens
(R9862001) - TLD+ (0.73 - 0.94:1) - 90 Degree Lens
(R9801414) - TLD+ (0.92 - 1.33:1)
(R9862005) - TLD+ (1.24 - 1.56:1)
(R9862010) - TLD+ (1.49 - 2.02:1) *
(R9862020) - TLD+ (2.01 - 2.76:1) *
(R9862030) - TLD+ (2.69 - 4.41:1) *
(R9862040) - TLD+ (4.37 - 7.35:1) *
(R9829997) - TLD+ (6.95 - 10.83:1)
* Standard Lens Option(s)
- Latence
- TBD
- Décalage optique de la lentille
Up to 97% shift up, 76% down, & up to 28% Horizontal (depending on lens selection)
Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here
- Correction des couleurs
- P7 RealColor™
- Gamme de couleurs
- Up to DCI (P3)
- Traitement des images
- Embedded Warp & Blend Engine
- WARP
- 4-Corner Warp & Bow Correction via Warp Engine
- Orientation
- 360° Rotation
- Connexion réseau
- 10/100 Ethernet via RJ45 connection
- Humidité de fonctionnement
- 0 to 80% (relative humidity)
- HDR
- HDR10
- 3D
- Active Stereoscopic 3D Additional hardware required please contact an authorized Barco representative for details
- Entrées
- 1 x HDMITM 2.0 (HDCP 2.2) 2 x HDBaseT (HDCP 1.4 - 9Gbps only) 1 x Display Port 1.2 Quad 3G / 12G SDI / BarcoLink 1 x RJ45 Ethernet 1 x RS232 1 x USB 2 x DMX (1 x Input / 1 x Output) 1 x XLR for Wired Remote 2 x 3D Sync (1 x Input / 1 x Output) Optional Upgrade: Quad DP1.2
- Dimensions d'expédition
- Including Pallet - Excluding Lens (Packaged Separately)
850 x 665 x 613 mm
33.46 x 26.18 x 24.13 in.
- Contrôle
- IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant WiFi (Optional), XLR Wired Remote, GSM (Optional)
- Poids d'expédition
- TBD
- Alimentation électrique
- 110 - 130V / 200 - 240V / 50 - 60Hz
- Accessoires standard
- Power Card / Remote control
- Certifications
- CE, FCC Class A and cCSAus
- Consommation électrique
- 110V: 1,321W Max, measured in 20-25°C / 68-77°F
230V: 1256W Max 20-25°C / 68-77°F
Power consumption will increase if ambient temperatures increses above 25°C / 77°F
- Niveau de bruit (habituel à 25 °C/77 °F)
- 43 dB(A)
- Température de fonctionnement
- 0 to 40 °C at Sea Level
Optimal Set Point: 20 °C
- *
- Firmware upgradable
Please contact an authorized Barco representative for details
- BTU par heure
- Max. 4,288 BTU/h @ 200 - 240V
Max. 4,516 BTU/h @ 110 - 130V
- Exigences en matière de flux d'air
- Air Inlet (from Rear w/Feet Down): Front / Top / Right
Exhaust (from Rear w/Feet Down): Rear Clearance Requirements:
Front: 40cm
Left: 1cm
Right: 40cm
Rear: 40cm
Top: 40cm
- Débit d'air d'échappement
- 152 ft3/min @ 25 °C
258 m3/hour @ 25 °C Download Lens & Airflow Data Here
- Dimensions (l x L x h)
- Excluding Lens
540 x 725 x 355 mm
21.26 x 28.54 x 14 in.
- Poids
- Excluding Lens
48kg / 105bs
- Garantie
- Limited 3 years parts and labor
Extendable up to 5 years
- Exigences de sécurité
- This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 2.3 is installed. Refer to the installation manual for further information.
lentilles
Lentille TLD+ (0,39:1 WU/HD) (0,42:1 WQ/4KUHD) (0,38:1 2K/4K 0,98" DMD) R9801661
Lentille TLD+ (0,39:1 WU/HD) (0,42:1 WQ/4KUHD) (0,38:1 2K/4K 0,98" DMD)
Lentille TLD+ (0,39:1 WU/HD) (0,42:1 WQ/4KUHD)
Lentille TLD+ (0,39:1 WU/HD) (0,42:1 WQ/4KUHD)
Lentille TLD+ (0,67 - 0,88:1 pour WU/HD) (0,71-0,93:1 WQ/4KUHD) (0,64-0,82:1 2K/4K 0,98" DMD)
Lentille TLD+ (0,67 - 0,88:1 pour WU/HD) (0,71-0,93:1 WQ/4KUHD)
Lentille TLD+ (0,67 - 0,88:1 pour WU/HD) (0,71-0,93:1 WQ/4KUHD)
TLD+ (1,39 - 1,89:1 WU/HD) (1,49 - 2,03:1 WQ/4KUHD) (1,5 - 2,0:1 SXGA+) (1,3-1,75:1 2K/4K 0,98" DMD)
Lentille TLD+ (1,39 - 1,87:1 WUXGA) (1,48 - 2,0 WQ/4KUHD) (1,5 - 2,0:1 SXGA+)
Lentille TLD+ (1,39 - 1,87:1 WUXGA) (1,48 - 2,0 WQ/4KUHD) (1,5 - 2,0:1 SXGA+)
TLD+ (1,89-2,55:1 WU/HD) (2,02-2,73:1 WQ/4KUHD) (2,0-2,8:1 SXGA+) (1,75-2,4:1 2K/4K 0,98" DMD)
Lentille TLD+ (1,87 - 2,56:1 WUXGA) (2,0 - 2,76 WQ/4KUHD) (2,0 - 2,8:1 SXGA+)
Lentille TLD+ (1,87 - 2,56:1 WUXGA) (2,0 - 2,76 WQ/4KUHD) (2,0 - 2,8:1 SXGA+)
TLD+ (2,56-4,13:1 WU/HD) (2,74-4,43:1 WQ/4KUHD) (2,8-4,5:1 SXGA+) (2,4-3,91:1 2K/4K 0,98" DMD)
TLD+ (4,17-6,97:1 WU/HD) (4,42-7,46 WQ/4KUHD) (3,91-7,5:1 SXGA+) (3,91-6,52:1 2K/4K 0,98" DMD)
TLD+ (6,92-10,21:1 WU/HD) (7,41-11,03 WQ/4KUHD) (7,5-11,2:1 SXGA+) (6,5-9,66:1 2K/4K 0,98" DMD)
TLD+ Ultra (0,86-1,25:1 WU/HD) (0,93-1,33:1 WQ/4KUHD) (0,86-1,25:1 SXGA+) (0,8-1,16:1 2k/4K 0,98" DMD)
TLD+ Ultra (1,17-1,50:1 WU/HD) (1,25-1,60:1 WQ/4KUHD) (1,25-1,6:1 SXGA+) (1,09-1,4:1 2k/4K 0,98" DMD)
Vous pouvez désormais trouver tous les supports, brochures, présentations, livres blancs et documents marketing à télécharger dans notre nouveau centre de téléchargement amélioré.
Visiter le Media CenterProduits similaires
Série Pulse
Balder
Une force divine, apportant beauté et vie aux installations de home cinéma et espaces multimédia les plus raffinés.
Découvrir
Série Pulse
Balder Cinemascope
The cornerstone of home cinema systems designed to deliver outstanding experiences in the world's finest homes.
Découvrir
Série Pulse
Bragi
Bragi s’appuie sur la célèbre plateforme électronique et logicielle Barco Pulse et est alimenté par un nouveau moteur de lumière LED RVB révolutionnaire à haute densité de lumens (HLD).
Découvrir
Série Pulse
Bragi CinemaScope
Utilisant la plateforme électronique et logicielle Pulse de Barco, réputée pour sa qualité, le Bragi CinemaScope est alimenté par un nouveau moteur lumineux LED RGB à haute densité de lumens (HLD) révolutionnaire.
Découvrir
Vous recherchez des documents techniques ou une assistance produit ?
Pour les téléchargements techniques tels que les pilotes, les firmwares, les manuels, les schémas et la documentation, nous vous invitons à consulter notre page d'assistance produit.
Accédez à l'assistance produit