Freya+

Specifiche generali

Tipo di proiettore

Three chip DLP

Tecnologia

3x 0.98” DC4K TRP

Risoluzione

4,096 x 2,160 (4K)

Proporzioni

1.89:1

Sorgente luminosa

RGB Laser

Emissione luminosa

13,500 ANSI Lumens

Rapporto di contrasto

5,500:1 Sequential
1,000:1 ANSI

Uniformità della luminosità

80% at Sides
75% at Corners

Intervallo obiettivo

Type B Lenses:
(R98013983) - Zoom Lens 1.38” VHC HDR 4K: 1.58 – 2.41:1 *
(R98013333) - Zoom Lens 1.38” VHC HDR 4K: 1.89 – 2.58:1 *
(R98013343) - Zoom Lens 1.38” VHC HDR 4K: 2.03 – 2.94:1 *
(R98013533) - Zoom Lens 1.38” VHC HDR 4K: 2.31 – 3.78:1 *
(R98013543) - Zoom Lens 1.38” VHC HDR 4K: 2.77 – 4.76:1 *

Type C Lenses:
(R98620053) - TLD+ VHC ULTRA LENS: 1.09 - 1.40:1
(R98620103) - TLD+ VHC ULTRA LENS: 1.28 - 1.74:1

* Standard Lens Option(s)

Spostamento obiettivo ottico

Type B Lenses:
55% Up and Down
30% Left and Right

Type C Lenses:
21% Up and 50% Down
10% Left and Right

Inclinazione

Freya+:
15˚ Forwards
15˚ Backwards

Freya+ Architectural:
90˚ Forwards
90˚ Backwards

Correzione del colore

P7

Gamma di colori

DCI P3 / 100% of Rec.2020; when measured in xy-color coordinates)

Elaborazione delle immagini

Alchemy - Integrated Cinema Media Processor (ICMP)

WARP

N/A

Orientazione

Pedestal / Table Top

Connessione in rete

10/100 Ethernet via RJ45 connection

HDR

HDR10

3D

Active glasses systems and polarization systems on silver screens are supported.
Color separation systems are not supported.

Ingressi

Barco Alchemy ICMP included in the projector:
2 x HDMI2.0a (up to 4K 2D 60fps)
2 x 3G-SDI inputs
16 x AES/EBU audio channels (2 x RJ45)
8 x GPI, 8 x GPO (4 x RJ45)
2 x Gbe for content connectivity & ingest
2 x front-accessible USB 3.0 for fast ingest
2 x front-accessible USB 2.0

DCI 4K 2D up to 60fps*
DCI 4K 3D (24 or 30fps per eye)*
DCI High Frame Rates 2K 3D up to 120fps (60fps per eye)
JPEG 2000 bit-rates up to 625 Mbps
MPEG-2 (4:2:0 and 4:2:2 up to 60fps)

DCI

DCI Compliant

Archiviazione integrata

3.9TB effective storage (RAID-5)
via 3 x 2TB Hot-swappable 2.5" hard-drives

Controllo

RS232, TCP/IP, 8 x GPIO

Requisiti di alimentazione

Single Phase: 200 - 240V, L1 + N + PE, 14A, 50 - 60Hz (Y)

Triple Phase: 200 - 240V / 346 - 415V, 3W + N + PE, 9A, 50/60Hz
Triple Phase: 200 - 240V, 3W + PE, 11A, 50/60Hz

Consumo energetico

2.4kW (3W in Eco Mode)

Livello di rumore (tipico a 25°C/77°F)

48 dB(A) - Min (ambient temperature below 20°C)
50 dB(A) - Normal
60 dB(A) - Max (ambient temperature over 35°C)

Intervallo temperature in funzionamento

10 - 40°C (104F) Max. (at Sea Level)

Umidità in funzionamento

20 - 80% Relative Humidity

BTU per ora

7,750 BTU/h

Requisiti per flusso d’aria

Air Inlet (from Rear w/Feet Down): Front / Rear / Bottom (at user input side) Exhaust (from Rear w/Feet Down): Top

Ventilazione di scarico

400 CFM

Dimensioni (PXLXA)

Freya+: (excl. Lens)
C Type Lens Holder:
710 x 1,070 x 547 mm
27.95 x 42.13 x 21.54 inches

B Type Lens Holder:
710 x 1,132 x 547 mm
27.95 x 44.55 x 21.54 inches

Freya+ Architectural: (excl. Lens)
C Type Lens Holder:
976 x 1,070 x 702 mm
38.43 x 42.13 x 27.64 inches

B Type Lens Holder:
976 x 1,132 x 702 mm
38.43 x 44.55 x 27.64 inches

Peso

Freya+: (excl. Lens)
105kg / 231.5lbs

Freya+ Architectural: (excl. Lens)
140kg / 309 lbs

Garanzia

Limited 3 years parts and labor
Extendable up to 5 years

Requisiti di sicurezza

This projector becomes RG2 when specified interchangeable lens with throw ratio less than or equal to 1.5 is installed.

For US Market: This projector becomes RG2 when specified interchangeable lens with throw ratio less than or equal to 1.0 is installed.

For more information please refer to the user manual.