Hodr Cinemascope

Specifiche generali

Tipo proiettore

Three chip DLP

Durata della sorgente luminosa

Up to 20,000

CLO (emissione luminosa costante)

Yes

Schermo paraluce ottico

Yes

Tecnologia

3 x 0.90" DMD™ with sealed core

Server web integrato

Yes

Risoluzione

5,120 x 2,160 (5K UHD)

Diagnostica

via Prospector web interface

Rapporto di aspetto

2.37:1 (CinemaScope)

Fonte di luce

Laser phosphor

Potenza luminosa

Up to 5,600 ANSI Lumens Dimable to 3,000 lumens

Rapporto di contrasto

20,000:1 (with DynaBlack enabled), 2,000:1 Sequential 600:1 ANSI

Uniformità della luminosità

>90%

Risoluzioni di input

HDMI^TM:
Up to 4,096 x 2,160 @ 24/25/30/50/60Hz

DisplayPort (Single Input):
Up to 4,096 x 2,160 @ 24/30/50/60Hz


via Optional Quad DP1.2 Input Card

DisplayPort (Layout Mode: 2 x 2) *:
Up to 1,920 x 1,080 @ 120Hz
Up to 2,048 x 1,080 @ 120Hz

DisplayPort (Layout Mode: 4 x 1) *:
Up to 960 x 2,160 @ 120Hz

* Specialist GFX cards may be required

Gamma delle lenti

(R9801661) - TLD+ (0.41:1) - 90 Degree Lens
(R9862001) - TLD+ (0.73 - 0.94:1) - 90 Degree Lens
(R9801414) - TLD+ (0.92 - 1.33:1)
(R9862005) - TLD+ (1.24 - 1.56:1)
(R9862010) - TLD+ (1.49 - 2.02:1) *
(R9862020) - TLD+ (2.01 - 2.76:1) *
(R9862030) - TLD+ (2.69 - 4.41:1) *
(R9862040) - TLD+ (4.37 - 7.35:1) *
(R9829997) - TLD+ (6.95 - 10.83:1)
* Standard Lens Option(s)

Latenza

TBD

Spostamento della lente ottica

Up to 97% shift up, 76% down, & up to 28% Horizontal (depending on lens selection)

Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here

Correzione del colore

P7 RealColor™

Gamut di colore

Up to DCI (P3)

Elaborazione delle immagini

Embedded Warp & Blend Engine

WARP

4-Corner Warp & Bow Correction via Warp Engine

Orientamento

360° Rotation

Connessione di rete

10/100 Ethernet via RJ45 connection

Umidità operativa

0 to 80% (relative humidity)

HDR

HDR10

3D

Active Stereoscopic 3D Additional hardware required please contact an authorized Barco representative for details

Ingressi

1 x HDMITM 2.0 (HDCP 2.2) 2 x HDBaseT (HDCP 1.4 - 9Gbps only) 1 x Display Port 1.2 Quad 3G / 12G SDI / BarcoLink 1 x RJ45 Ethernet 1 x RS232 1 x USB 2 x DMX (1 x Input / 1 x Output) 1 x XLR for Wired Remote 2 x 3D Sync (1 x Input / 1 x Output) Optional Upgrade: Quad DP1.2

Dimensioni di spedizione

Including Pallet - Excluding Lens (Packaged Separately)
850 x 665 x 613 mm
33.46 x 26.18 x 24.13 in.

Controllo

IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant WiFi (Optional), XLR Wired Remote, GSM (Optional)

Peso con imballo

TBD

Requisiti di alimentazione

110 - 130V / 200 - 240V / 50 - 60Hz

Accessori standard

Power Card / Remote control

Certificazioni

CE, FCC Class A and cCSAus

Consumo energetico

110V: 1,321W Max, measured in 20-25°C / 68-77°F

230V: 1256W Max 20-25°C / 68-77°F

Power consumption will increase if ambient temperatures increses above 25°C / 77°F

Livello di rumore (tipico a 25°C/77°F)

43 dB(A)

Temperatura di esercizio

0 to 40 °C at Sea Level
Optimal Set Point: 20 °C

*

Firmware upgradable
Please contact an authorized Barco representative for details

BTU/ora

Max. 4,288 BTU/h @ 200 - 240V
Max. 4,516 BTU/h @ 110 - 130V

Requisiti del flusso d'aria

Air Inlet (from Rear w/Feet Down): Front / Top / Right
Exhaust (from Rear w/Feet Down): Rear Clearance Requirements:
Front: 40cm
Left: 1cm
Right: 40cm
Rear: 40cm
Top: 40cm

Flusso d'aria di scarico

152 ft³/min @ 25 °C
258 m³/hour @ 25 °C Download Lens & Airflow Data Here

Dimensioni (P x L x A)

Excluding Lens
540 x 725 x 355 mm
21.26 x 28.54 x 14 in.

Peso

Excluding Lens
48kg / 105bs

Garanzia

Limited 3 years parts and labor
Extendable up to 5 years

Requisiti di sicurezza

This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 2.3 is installed. Refer to the installation manual for further information.