Specifiche generali

Tipo di proiettore

Single chip DLP

Tecnologia

0.66" DMD™

Risoluzione

3,840 x 2,160 (4K UHD)

Proporzioni

1.78:1 (16:9)

Sorgente luminosa

Laser phosphor

Durata sorgente luminosa

40,000hrs in Long Life Mode
20,000hrs in Normal Mode
12,000hrs in Silent Mode
12,000hrs in High Brightness Mode

Emissione luminosa

Up to 6,500 ANSI lumens

CLO (Constant Light Output)

Yes

Rapporto di contrasto

1,300:1 Sequential
350:1 ANSI

Uniformità della luminosità

>85%

Intervallo obiettivo

(R98017241) - GLD (0.80 - 1.00:1)
(R98017221) - GLD (1.00 - 1.35:1)
(R98017201) - GLD (1.35 - 2.00:1) *
(R98017191) - GLD (1.35 - 2.00:1) - Manual Zoom & Focus **
(R98017211) - GLD (2.00 - 3.00:1)

NOTE: The below lens options require an EN Series lens adapter (R9801442)
(R9801832) - FLDX UST (0.54:1) - 90° lens
(R9802244) - EN67 (0.86:1)
(R9802243) - EN66 (1.06 - 1.60:1)
(R9802003) - EN76 (1.26 - 1.72:1)
(R9802242) - EN63 (1.58 - 2.25:1)
(R9802241) - EN61 (2.25 - 3.31:1)
(R9801211) - EN44 (3.30 - 6.08:1)

* Standard Lens Option(s) - USA
** Standard Lens Option(s) - Rest of World

Spostamento obiettivo ottico

GLD Series Lens Options
Up to 60% vertical lens shift & up to 18% horizontal lens shift (depending on lens selection) EN Series Lens Options
Up to 67% vertical lens shift & up to 18% horizontal lens shift (depending on lens selection) Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here

Schermo paraluce ottico

Yes

Correzione del colore

P7 RealColor™

Gamma di colori

REC.709

Elaborazione delle immagini

Embedded Warp & Blend Engine

WARP

4-Corner Warp & Bow Correction via Warp Engine

Orientazione

360° Rotation

Connessione in rete

10/100 Ethernet via RJ45 connection

Server web integrato

Yes

Diagnostica

via Prospector web interface

HDR

HDR10

3D

Active Stereoscopic 3D
Additional hardware required please contact an authorized Barco representative for details

Ingressi

1 x HDMI 2.0 (HDCP 2.2)
1 x HDBaseT (HDCP 1.4 - 9Gbps only)
2 x Dual Link DVI-D
2 x Display Port (1.2)
12G-SDI 1 x RJ45 Ethernet
1 x RS232
1 x Remote Control (RC)
3 x USB (2 x Rear, 1 x Front)
DMX (1 x Input, 1 x Output)

Risoluzioni in ingresso

From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
or up to 2,560 x 1,600 @ 120Hz

Latenza

TBD

Controllo

IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them.
Download our integration guide for more information.

Requisiti di alimentazione

100 - 240V / 50 - 60Hz
US Requires: 20A Service (NEMA 5-20P Plug Type)

Consumo energetico

850 W maximum

BTU per ora

2,900 BTU/h maximum

Livello di rumore (tipico a 25°C/77°F)

35 dB(A)

Intervallo temperature in funzionamento

10 to 45 °C at Sea Level
Optimal Set Point: 20 °C

Umidità in funzionamento

20 to 80% (relative humidity)

Requisiti per flusso d’aria

Air Inlet (from Rear w/Feet Down):  Left Side
Exhaust (from Rear w/Feet Down):  Right Side Clearance Requirements:
Front: 1cm
Left: 50cm
Right: 80cm
Rear: 20cm
Top: 1cm

Ventilazione di scarico

221 ft³/min @ 22.9 °C
375 m³/hour @ 22.9 °C
Download Lens & Airflow Data Here

Dimensioni (PXLXA)

Excluding Lens
481 x 680 x 239 mm
18.9 x 26.8 x 9.4 in.

Peso

Excluding Lens
25.5 kg / 56.2 lbs

Dimensioni imballaggio (P x L x A)

Excluding Lens
920 x 700 x 700 mm
36 x 27 x 27 in.

Peso con imballo

Excluding Lens
42 kg / 92 lbs

Accessori

Power Cord, Remote Control

Certificazioni

CE, FCC Class A and cCSAus

Requisiti di sicurezza

This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 3.5 is installed.<\p> Refer to the installation manual for further information.

Garanzia

Limited 3 years parts and labor
Extendable up to 5 years

*

Firmware upgradable
Please contact an authorized Barco representative for details