Prerequisites
Ensure the Base Unit is powered on (see here) and connected to the network (see here) before attempting to access the ClickShare Configurator.
How to access
- Find the IP address of the Hub device:
- On the Control Panel tablet, navigate to More → Settings → Device Settings → About.
- The IP address of the Hub device is displayed there.
- Connect the computer to the same network as the Hub device.
- Enter
https://followed by the IP address of the Hub device in the address bar of a browser of choice.https://<Hub device IP address> - Bypass the browser warning (For example in Chrome: Advanced → Proceed)
Note: Depending on the web browser used, the way to bypass the browser warning may vary. - Once completed, the ClickShare Configurator (WebUI) page will be displayed.
Important notes
- Currently, the ClickShare Configurator for the Hub devices has only limited functionality:
- For device configuration and firmware updates, use one of the following:
- Microsoft Teams Admin Center, or
- Pro portals
