Installation process

1. Ensure that the installation area meets the environmental requirements. See “Installation conditions”
2. Decide where the projector will be mounted. See “Positioning the projector”
3. Unpack the projector and confirm that all equipment is present and in good working order. See “Initial inspection”
4. Mount the projector. See “Mounting the projector, general considerations”, “Projector safe attachment points”, and “Positioning the projector”.
5. Install the projector lens. See “Replace a lens”.
6. Connect the source.
7. Power up the projector. See “Power up the projector”.
8. Set up the image.