General specifications

Type projector

Single chip DLP

Technologie

0.9" DMD™

Resolutie

5,120 x 2,160 (5K UHD)

Beeldverhouding

2.37:1 (CinemaScope)

Lichtbron

Laser phosphor

Levensduur lichtbron

20,000 - 60,000 hours
Laser intensity dependent

Lichtuitvoer

DCI (P3) Color Wheel: Up to 3,600 ANSI lumens
T Color Wheel: Up to 4,000 ANSI lumens
M Color Wheel: Up to 5,600 ANSI lumens

CLU (constante lichtuitvoer)

Yes

Contrastverhouding

1,800:1 Sequential
450:1 ANSI

Helderheidsuniformiteit

>90%

Lensbereik

(R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation)
(R9801832) - FLDX UST (0.41:1) - 90° Lens
(R9802244) - EN67 (0.65:1)
(R9802243) - EN66 (0.80 - 1.21:1)
(R9802003) - EN76 (0.95 - 1.30:1)
(R9802242) - EN63 (1.20 - 1.70:1) *
(R9802241) - EN61 (1.70 - 2.50:1) *
(R9801211) - EN44 (2.50 - 4.60:1)

* Standard Lens Option(s)

Optische lensverschuiving

Up to 122% vertical lens shift & up to 40% horizontal lens shift (depending on lens selection)

Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here

Optische dowser

Yes

Kleurcorrectie

P7 RealColor™

Kleurenspectrum

DCI (P3) Color Wheel: DCI P3
T Color Wheel: REC.709
M Color Wheel: REC.709

Beeldverwerking

Embedded Warp & Blend Engine

WARP

4-Corner Warp & Bow Correction via Warp Engine

Oriëntatie

360° Rotation

Netwerkverbinding

10/100 Ethernet via RJ45 connection

Geïntegreerde webserver

Yes

Diagnose

via Prospector web interface

HDR

HDR10

3D

Active Stereoscopic 3D
Additional hardware required please contact an authorized Barco representative for details

Ingangen

1 x HDMI^TM 2.0 (HDCP 2.2)
1 x HDBaseT (HDCP 1.4 - 9Gbps only)
2 x Dual Link DVI-D
2 x Display Port (1.2)
12G-SDI 1 x RJ45 Ethernet
1 x RS232
1 x Remote Control (RC)
3 x USB (2 x Rear, 1 x Front)
DMX (1 x Input, 1 x Output)

Invoerresoluties

From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
or up to 2,560 x 1,600 @ 120Hz

Latentie

TBD

Controle

IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them.
Download our integration guide for more information.

Voedingsvereisten

100 - 240V / 50 - 60Hz

Energieverbruik

1,100 W - Max.

Stroom in stand-by

Standby ECO Mode:
110v - 0.73W (with LAN Connection)
230v - 0.82W (with LAN Connection)

BTU/uur

4,000 BTU/h - Max.

Geluidsniveau (standaard bij 25°C/77°F)

36 dB(A)

Bedrijfstemperatuur

10 to 45 °C at Sea Level
Optimal Set Point: 20 °C

Operationele vochtigheid

20 to 80% (relative humidity)

Luchtstroomvereisten

Air Inlet (from Rear w/Feet Down):  Right Side
Exhaust (from Rear w/Feet Down):  Rear Clearance Requirements:
Front: 1cm
Left: 1cm
Right: 50cm
Rear: 100cm
Top: 1cm

Luchtuitstroom

112 ft³/min @ 25 °C
190 m³/hour @ 25 °C
Download Lens & Airflow Data Here

Afmetingen (B x L x H)

Excluding Lens
475 x 588 x 286 mm
18.7 x 23.1 x 11.3 in.

Gewicht

Excluding Lens
37 kg / 81.5 lbs

Verzendingsafmetingen

Excluding Lens
730 x 600 x 480 mm
28.7 x 23.7 x 18.9 in.

Verzendgewicht

Excluding Lens
43 kg / 94.8 lbs

Standaardaccessoires

Power Cord, Remote Control

Certificeringen

CE, FCC Class A and cCSAus

Veiligheidsvereisten

This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 6.0 is installed. Refer to the installation manual for further information.

24/7 operation

This projector is designed and warranted for heavy duty 24/7 operation.
Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications.

Garantie

Limited 3 years parts and labor
Extendable up to 5 years

*

Firmware upgradable
Please contact an authorized Barco representative for details