Barco zoekopdracht

myBarco-meldingen

Ongelezen

Lezen

Je hebt geen meldingen.

How to verify my ClickShare CX-/C-series Gen1 Base Unit is pre-installed with firmware version 2.10 or above?

Artikelnummer: [9744]

Van toepassing op

Check the printed REV number on the backside of the packing box containing the Base Unit and compare it with the REV numbers mentioned in table below.


 

Delivered with firmware version 2.10 or above pre-installed
Base UnitREV number
CX-50 Gen113 and higher
CX-30 Gen112 and higher
CX-20 Gen112 and higher
C-10 Gen104 and higher
C-5 Gen104 and higher

 

Info! 
All Gen2 variants are pre-installed with a firmware version higher than 2.10.
To identify your ClickShare Base Unit model, see KB2865.


Related Articles

Eigenschappen

Laatst bijgewerkt 2 sep 2025

No solution found?

Phone support

Our helpdesk provides you with prompt phone support. A team of experienced support engineers is at your service for any professional assistance.