ClickShare CSE-200 base unit firmware

v1.11.11.3 04 Mar 2024 (407 MB)

Download

SHA256 checksum

91e6328c88990ac896c21cd2ff3c6348f29347bfd7d2b4675af70fe3e84ffc83

Release notes

=== A number of known issues from the earlier firmware version have been resolved ===

Added Strict-Transport-Security header to the REST API

=== Not all issues could be resolved yet, these are the ones that are remaining in this release ===

Sometimes Buttons can't connect if they are plugged in before the Base Unit has been fully started. Refer to KB8293
ClickShare WebUI for CS-100 and CSE-200 Base Units not opening in the Chrome browser on Windows 11, more information can be found on KB7472

=== Important notes to consider before upgrading ===

In order to start the ClickShare App on the Button automatically when plugging it in, version 1.20 of the ClickShare Windows Driver is needed.
v01.11.04 is a minimal version and does not allow downgrading to any version below v01.11.04 after installation.

v1.11.10.3 15 May 2023 (407 MB)

Download

SHA256 checksum

c221ba97bdc646acb29fd1b57d3670d9052a0368930da4ae8ef503476bbaaafd

Release notes

=== A number of known issues from the earlier firmware version have been resolved ===

On Windows 11, the ClickShare Configurator is again accessible with Chrome browsers .
Stability improvement when sharing YouTube content over Airplay on Apple iPads.
Connection improvement for Button and Desktop App when a touch monitor is attached to the Base Unit.

=== Not all issues could be resolved yet, these are the ones that are remaining in this release ===

Sometimes Buttons can't connect if they are plugged in before the Base Unit has been fully started. Refer to KB8293

=== Important notes to consider before upgrading ===

In order to start the ClickShare App on the Button automatically when plugging it in, version 1.20 of the ClickShare Windows Driver is needed.
v01.11.04 is a minimal version and does not allow downgrading to any version below v01.11.04 after installation.

v1.11.8.1 12 Jan 2023 (407 MB)

Download

SHA256 checksum

8e42dcbcd2211fce8fa0bc84fc38d6f7423e6d3c1e82dcaf29d26863b7932937

Release notes

=== A number of known issues from the earlier firmware version have been resolved === === Not all issues could be resolved yet, these are the ones that are remaining in this release ===

Sometimes Buttons can't connect if they are plugged in before the Base Unit has been fully started. Refer to KB8293
ClickShare WebUI for CS-100 and CSE-200 Base Units not opening in the Chrome browser on Windows 11, more information can be found on KB7472

=== Important notes to consider before upgrading ===

In order to start the ClickShare App on the Button automatically when plugging it in, version 1.20 of the ClickShare Windows Driver is needed.
v01.11.04 is a minimal version and does not allow downgrading to any version below v01.11.04 after installation.

v1.11.6.1 04 Jul 2022 (414 MB)

Download

SHA256 checksum

f7625be58f5739dd07d618a0d460b9f4643b582e64acda328878826b247fb3a2

Release notes

=== A number of known issues from the earlier firmware version have been resolved ===

General security improvements

=== Not all issues could be resolved yet, these are the ones that are remaining in this release ===

Sometimes Buttons can't connect if they are plugged in before the Base Unit has been fully started. Refer to https://www.barco.com/en/support/knowledge-base/KB8293

=== Important notes to consider before upgrading ===

In order to start the ClickShare App on the Button automatically when plugging it in, version 1.20 of the ClickShare Windows Driver is needed.
v01.11.04 is a minimal version and does not allow downgrading to any version below v01.11.04 after installation.

v1.11.5.3 18 May 2022 (399 MB)

Download

SHA256 checksum

61fc090616073948e95ead6ce2c168bb17f0a1906626d63f3af869dd7cae60ad

Release notes

=== A number of known issues from the earlier firmware version have been resolved ===

General security and stability improvements for BYOD
Better support for Airplay from high resolution devices, ensuring minimal latency when sharing.

=== Not all issues could be resolved yet, these are the ones that are remaining in this release ===

Sometimes Buttons can't connect if they are plugged in before the Base Unit has been fully started.

=== Important notes to consider before upgrading ===

v01.11.04 is a minimal version and does not allow downgrading to any version below v01.11.04 after installation.
In order to start the ClickShare App on the Button automatically when plugging it in, version 1.20 of the ClickShare Windows Driver is needed.

v1.11.4.6 14 Jan 2022 (389 MB)

Download

SHA256 checksum

437d1371976dc881f903f3686cf5fe96f43e232fc8c8e661ea6dff4dbb18fbf8

Release notes

=== A number of known issues from the earlier firmware version have been resolved ===

ClickShare Desktop App has been updated to v04.18.00.0008
- On MAC OS, the cursor will remain visible when switching from screen to app window sharing
Patched CVE-2021-39685 to which the button was susceptible
Fixed problems when using "+" or " " in URL's with the REST-API

=== Not all issues could be resolved yet, these are the ones that are remaining in this release ===

Sometimes Buttons can't connect if they are plugged in before the Base Unit has been fully started. Refer to https://www.barco.com/en/support/knowledge-base/KB8293

=== Important notes to consider before upgrading ===

In order to start the ClickShare App on the Button automatically when plugging it in, version 1.20 of the ClickShare Windows Driver is needed.
v01.11.04 is a minimal version and does not allow downgrading to any version below v01.11.04 after installation.

v1.11.2.1 08 Oct 2021 (390 MB)

Download

SHA256 checksum

55ebfe1b3470713735aff6718902581f45b26ede99dbec7a3d6e69bde5e814e5

Release notes

=== A number of known issues from the earlier firmware version have been resolved ===

ClickShare Desktop App has been update to v04.17.00.0009
In rare occasions, the Base Unit would fail to start up. For example after power outage.
After frequent use, it's possible to see a black screen or the wallpaper when you start sharing.

=== Not all issues could be resolved yet, these are the ones that are remaining in this release ===

Sometimes Buttons can't connect if they are plugged in before the Base Unit has been fully started. Refer to https://www.barco.com/en/support/knowledge-base/KB8293

=== Important notes to consider before upgrading ===

Updates via auto-update will be available 2 weeks after the public availability of the firmware.
In order to start the ClickShare App on the Button automatically when plugging it in, version 1.20 of the ClickShare Windows Driver is needed.

v1.11.1.12 25 Jun 2021 (387 MB)

Download

SHA256 checksum

42261c95e94e037b462617eecf4ab7c5912fb9400d3805ebb61a2d44032193b7

Release notes

=== A number of known issues from the earlier firmware version have been resolved ===

After 2 consecutive boot cycles, configuration of network integration got lost and needed to be reapplied
There were some cases where Touchback registers wrong coordinates or stops working after extensive use. This also caused some pens not to work anymore.
Touchback was not active after re-plugging the USB connection.
In certain cases, a black image was shared while the source should be visible.
Accessing the ClickShare Configurator via FQDN was showing a malformed login page.
Trying to enable HTTPS with custom certificates, resulted in the wrong error message after using a pfx archive without the client certificate.
Several security improvements

=== Not all issues could be resolved yet, these are the ones that are remaining in this release ===

Sometimes Buttons can't connect if they are plugged in before the Base Unit has been fully started. Refer to https://www.barco.com/en/support/knowledge-base/KB8293

v1.11.0.2 14 Dec 2020 (386 MB)

Download

SHA256 checksum

515db6af1c95efe4ccf8098327f0d1e0117227cadf671d53e02c5a79a127834a

Release notes

=== A number of known issues from the earlier firmware version have been resolved ===

In certain cases, Buttons were unable to connect after some time
The SAN value was missing after the CSR generation process
Several security improvements

=== Not all issues could be resolved yet, these are the ones that are remaining in this release ===

Sometimes Buttons can't connect if they are plugged in before the Base Unit has been fully started. Refer to https://www.barco.com/en/support/knowledge-base/KB8293
There are some cases where Touchback registers wrong coordinates or stops working after extensive use

v1.10.1.3 16 Sep 2020 (382 MB)

Download

SHA256 checksum

63c2728b25647cbadd7e827969d1769c3488ea4a7ee2678b76c6a06122b8a4d7

Release notes

=== With this release ClickShare gives you improved user experiences, increased flexibility and security and additional features. === === The main new features included in the 1.10 release ===

DFS support for Buttons (R9861500D01 and R9861500D01C)
- Once updated, the ClickShare Buttons will be able to connect to DFS channels in the UNII-2A band
- Functionality restricted to models R9861500D01 and R9861500D01C
- Functionality restricted to Buttons paired with a Base Unit with the EU or NA SKU extension
[BETA] We're adding support for additional SCEP servers!
- Next to our existing support for SCEP enrolment via NDES (Network Device Enrolment Service), we've added initial support for other generic servers.
We've extended the possible parameters to use for NDES/SCEP enrolment.
A new Desktop App update to Reduce latency and have smoother results when sharing video content to the meeting room display when your pc is under high load or has a high resolution display.

=== Next to the addition of features, a number of known issues from the earlier firmware version have been resolved ===

Base Units are now properly joining multicast groups
After attaching and detaching the USB connection of a touch screen, Touchback was not available until the unit was rebooted
Several security improvements

=== Not all issues could be resolved yet, these are the ones that are remaining in this release ===

Sometimes Buttons can't connect if they are plugged in before the Base Unit has been fully started. Refer to https://www.barco.com/en/support/knowledge-base/KB8293

=== Important notes to consider before upgrading ===

Guidance with regards to the new and updated integration options can be found in our Network Integration Guide and the respective product manuals.

v1.10.0.13 18 Jun 2020 (368 MB)

Download

SHA256 checksum

85ee09378f57ffacf75553891849c475b929c95e48eef4364e55cd700078f3fd

Release notes

=== With this release ClickShare gives you improved user experiences, increased flexibility and security and additional features. === === The main new features this release includes ===

DFS support for Buttons (R9861500D01 and R9861500D01C)
- Once updated, the ClickShare Buttons will be able to connect to DFS channels in the UNII-2A band
- Functionality restricted to models R9861500D01 and R9861500D01C
- Functionality restricted to Buttons paired with a Base Unit with the EU or NA SKU extension
[BETA] We're adding support for additional SCEP servers!
- Next to our existing support for SCEP enrolment via NDES (Network Device Enrollment Service), we've added initial support for other generic servers.
We've extended the possible parameters to use for NDES/SCEP enrolment.

=== Next to the addition of features, a number of known issues from the earlier firmware version have been resolved ===

Several instabilities on BYOD services like Airplay
Limited number of characters available in the ClickShare app to show room names
Improved security in the ClickShare Configurator, including CSRF protection
Several security topics including CVE-2019-18824, CVE-2019-18829
In some cases TouchBack stopped working after some time
IGMP packets were not sent out by the Base Unit

=== Not all issues could be resolved yet, these are the ones that are remaining in this release ===

Sometimes Buttons can't connect if they are plugged in before the Base Unit has been fully started. Refer to https://www.barco.com/en/support/knowledge-base/KB8293

=== Important notes to consider before upgrading ===

Guidance with regards to the new and updated integration options can be found in our Network Integration Guide and the respective product manuals.

v1.9.2.12 28 Feb 2020 (372 MB)

Download

SHA256 checksum

d1110e4da338e4e77e8f55295794c6ed00c2ffa8e905202b1f2d0f7665771805

Release notes

=== With this release ClickShare gives you improved user experiences, increased flexibility and security and additional features. === === The main new features this release includes ===

The same experience, an intuitive connection
- The ClickShare Desktop App is now just a Button away, bringing you features like App sharing, to work on notes during your presentation. Want it at all times for a Buttonless workflow? Always on the edge of your seat for the latest features? Grab the installer at www.clickshare.app!
- Having issues routing Airplay discovery on your network? Using Bluetooth, Apple devices can now discover the Base Unit with ease.

=== Next to the addition of features, a number of known issues from the earlier firmware version have been resolved ===

Desktop App tended to connect to the Wi-Fi of the Base Unit instead of the wired network connection.
An updated Desktop App is available on the Button which includes several bug-fixes and experience improvements.
Suboptimal Video performance when using Buttons on 2.4 GHz in Stand Alone mode.
Uploading a full backup in the ClickShare Configurator of a previous version was failing due to missing parameters.
Prevented a temporary DoS on the REST interface.
Re-generating the self-signed certificate for HTTPS resulted in an error page.
When changing security levels, the settings were immediately applied without asking confirmation.
In some occasions, during the configuration of Buttons Connect To, some settings were not applied correctly.

=== Not all issues could be resolved yet, these are the ones that are remaining in this release ===

Several instabilities on BYOD services like Airplay and Miracast. Refer to https://www.barco.com/en/support/knowledge-base/kb11106
Occasionally a black screen can occur while presenting. Refer to https://www.barco.com/en/support/knowledge-base/KB9859

=== Important notes to consider before upgrading ===

Guidance with regards to the new and updated integration options can be found in our Network Integration Guide and the respective product manuals.

v1.9.1.7 13 Dec 2019 (371 MB)

Download

SHA256 checksum

b502358726617c32da7d2877f1788527424057d28b0c7c750e05e099ffbb6421

Release notes

=== With this release ClickShare gives you improved user experiences, increased flexibility, security and additional features. ===
=== The main new features this release includes ===

The same experience, an intuitive connection
- The ClickShare Desktop App is now just a Button away, bringing you features like App sharing, to work on notes during your presentation. Want it at all times for a Buttonless workflow? Always on the edge of your seat for the latest features? Grab the installer at www.clickshare.app!
- Having issues routing Airplay discovery on your network? Using Bluetooth, Apple devices can now discover the Base Unit with ease.

=== Next to the addition of features, a number of known issues from the earlier firmware version have been resolved ===

In some occasions an authentication failure was noticed with network integration due to lost settings
After intermittent upgrades, the unit was sometimes not manageable anymore by XMS
Chinese characters entered as meeting room name were not reflected in the mobile app
Mitigated security reports include CVE-2019-18827, CVE-2019-18830, CVE-2019-18831, CVE-2019-18826 and CVE-2019-18828

=== Important notes to consider before upgrading ===

Guidance with regards to the new and updated integration options can be found in our Network Integration Guide and the respective product manuals.
This update is a minimal version and does not allow downgrading to any version below v01.09.01 after installation.

v1.8.1.2 02 Aug 2019 (369 MB)

Download

SHA256 checksum

c971d732c990fff4a6b82bf24dfe121a15a26430099ea3eddea50465597e65fb

Release notes

=== A number of issues from the earlier firmware version has been resolved ===

The 1.8.1 firmware introduces a solution to an issue that was introduced in the 1.8 firmware by which it was impossible to upload a certificate via the ClickShare Configurator.
Note: the issue could only be encountered when doing a new configuration with manual certificate upload with 802.1x wired authentication or when doing a reconfiguration.

Configuring 802.1x with EAP and manual certificate upload results in "Please enter a value with a valid mimetype".

=== Important notes to consider before upgrading ===

This firmware introduces a mechanism for the auto renewal of (self-signed) certificates when they are expired. The user will not notice anything from this process.
As from the 1.8 firmware version, support for older Buttons without certificate (article number R9861006D01) is dropped on CS-100 (Huddle), CSE-200, CSE-200+ and CSE-800 models.
Support for MirrorOp has been dropped and we advise to work with the ClickShare apps.
For the Windows driver for ClickShare to detect the Button, they require an update. This will go automatically via update over Wi-Fi. Alternatively they can be paired and updated manually by plugging the Buttons into the respective Base Unit. More information can also be found on https://www.barco.com/en/support/knowledge-base/KB9619
Guidance with regards to the new and updated integration options can be found in our Network Integration Guide and the respective product manuals.

v1.8.0.6 26 Jul 2019 (369 MB)

Download

SHA256 checksum

ee30108a4cd9cd574954f5004cccaf534616fc46a2f05d1930f1f33e7e419ea2

Release notes

ClickShare is adding a set of important features to its portfolio. The new functionalities will improve both the user experience as well as the ClickShare IT friendliness

=== The main features this release includes ===

Custom Button Integration allows for greater flexibility when integrating your ClickShare devices by giving you full control over both the Button connection and the wireless settings of the Base Unit separately. This allows to enable presence detection for the ClickShare desktop App when the Button is fully integrated in the corporate network and to support direct connectivity for guests or BYOD.
Windows driver support for the ClickShare Button on Windows 7, 8, 8.1 and 10. The Windows driver removes the last hurdle in the ClickShare Button experience by removing any need for manual action before sharing. The Windows driver automatically launches the ClickShare Client on the Button, allowing to click the button without any user action. The Windows pc will automatically download the driver from the Windows Update store upon first insertion of the ClickShare Button (internet connection required).
Prevent laptop going to standby when a Button is sharing content to the Base Unit for an improved experience during presentations.

=== Next to the addition of features, a number of known issues from the earlier firmware version has been resolved ===

In certain instances, the internal Wi-Fi module became unavailable and required a reboot of the Base Unit.
It occurred that EAP-TLS authentication did not work after a reboot.
In the ClickShare configuration page, no message appeared to confirm that changes were applied.

=== Important notes to consider before upgrading ===

This firmware introduces a mechanism for the auto renewal of (self-signed) certificates when they are expired. The user will not notice anything from this process.
As from the 1.8 firmware version, support for older Buttons without certificate (article number R9861006D01) is dropped on CS-100 (Huddle), CSE-200, CSE-200+ and CSE-800 models.
Support for MirrorOp has been dropped and we advise to work with the ClickShare apps.
For the Windows driver for ClickShare to detect the Button, they require an update. This will go automatically via update over Wi-Fi. Alternatively they can be paired and updated manually by plugging the Buttons into the respective Base Unit. More information can also be found on https://www.barco.com/en/support/knowledge-base/KB9619
Guidance with regards to the new and updated integration options can be found in our Network Integration Guide and the respective product manuals.

v1.7.1.1 13 May 2019 (375 MB)

Download

SHA256 checksum

d0726bceafdef9cb836809b252094ae4804bb0b4342c5b0f810a344996cc1dc8

Release notes

===What is new===

This firmware improves the experience of our customer base that is increasingly making use of the 5 GHz Wi-Fi band.
- The 5 GHz band is now preferred over the 2.4 GHz band by the ClickShare Button in network integration mode in case an SSID is present on both bands with similar quality levels.
- Moreover, the scanning behavior in the 2.4 GHz range has been improved to make sure the Buttons connect to the most optimal access points in network integration mode.

v1.7.0.22 28 Mar 2019 (368 MB)

Download

SHA256 checksum

6c5c9663f5aac703c6a55983401ebf75ebad97300a1885bf0bd5b037486bfad0

Release notes

===What is new===

With this major firmware release, ClickShare is adding a set of IT friendly features to the current models, making the products a perfect fit to any enterprise environment.
The main features this release includes are:
- Support for SNMPv3 for monitoring Base Units and Buttons with your default monitoring software
- Support for custom certificates for https, avoiding privacy alerts when browsing to the ClickShare configuration page
- Support for 802.1x wired authentication including PEAP, EAP-TLS and EAP-TTLS
- Support for multiroot certificates to comply with certificate chaining IT architectures
- Support for the ClickShare App with presence detection via Wi-Fi beaconing

===What did we fix===

Next to additional features, the ClickShare team has been working hard to resolve a couple of known issues:
- Some CS-100 and CSE-200 units showed a sporadic problem of freezing output which required a reboot
- When enabling network integration, it is now possible to use slash or backslash in your identity or password
- You no longer lose your internet connection (data) on your mobile phone when connecting to the ClickShare Wi-fi
- Issue with certain Base Units which made connecting more than 10 buttons impossible

===Important note===

The 01.07.0022 firmware is a minimal version, which means that downgrading from this firmware to previous versions is not possible.

v1.6.1.2 14 Sep 2018 (363 MB)

Download

SHA256 checksum

36556393b4cf50d6f35fa95d8f776cc77015c4a232ab7c5460b2f8c12299e4be

Release notes

=== What's new in this release ===

Support for extension pack version 01.01 and higher.

=== Things we fixed ===

Issue where Button does not always connect to the closest access point in full network integration mode
Security fixes: CVE-2018-5390, CVE-2018-5391, CVE-2017-8890, CVE-2018-10943
Issue with EAP when using special characters in the password
Changing resolution over REST API needs to be done differently than described in the manual
API changing resolution doesn't work
Cosmetic typo in WebUI French
Wrong translation in Norwegian
Base Unit reboots at random moments in time
Airplay in stand-alone mode visible but not sharable
Airplay in CNI visible but not sharable

v1.6.0.3 29 Jun 2018 (359 MB)

Download

SHA256 checksum

33ef353c8c9f0d3098c907f314d804b887a037a983b56169892dbfcd1717d896

Release notes

=== What's new in this release ===

Touchback

Enable more interactive meetings with our new Touchback feature! When connecting a touch screen to your Base Unit, it is now possible to interact with the presenter. computer with touch. No need to install drivers, search for the USB cables or work with a dedicated room system: bring your own device, plug in a Button and discover a whole new level of collaboration.

Note: Touchback feature only works on the CSE-200 Base Units when used with Buttons with serial number R9861500D01 or R9861500D01C, and only when one presenter is on screen. For immediate use of the feature, make sure to pair the Buttons after updating. No configuration is needed on the Base Unit. List of supported touch screens can be found in the technical documentation section of the product page.
Support for the Button Manager

ClickShare now makes it easier for IT or facility managers or venue hosts to pair a number of ClickShare Buttons to a Base Unit in a particular meeting room without actually requiring physical access to the room or Base Unit. More information about the Button Manager can be found here: www.barco.com/product/clickshare-button-manager
Other

The ClickShare client is now signed with a new certificate.

'Capture More' mode is now used by default for screen scraping. This will only impact Windows 7 users.

=== Things we fixed ===

Issue where Button does not always connect to the closest access point in full network integration mode
Issue with EAP when using special characters in the password
Issue where a 'ClickShare server Error' was given on the CSE-200
Sending dummy string to port 7100 results in Base Unit crash (CVE-2018-10943)

v1.5.2.3 27 Mar 2018 (355 MB)

Download

SHA256 checksum

75f246c16fd9d535dcaa417e1f61177aa44d735811c8c1a33d5473fe2341e6de

Release notes

=== What's new in this release ===

Update privacy policy and EULA.

=== Things we fixed ===

"intense use, change to another WiFi channel" in Web UI + 5GHZ doesn't work anymore.
Web UI showed "Failing systems: ClickShare server".
Wireless SSID still shown on dashboard page in corporate network integrated mode.
Windows ClickShare Client remains running in the background up to 2 minutes after removing the Button.
Youtube in Firefox not captured in full screen.
Extended desktop and primary monitor words are not the same in Japanese.
ClickShare client stopped working after start up.

v1.5.1.2 27 Dec 2017 (362 MB)

Download

SHA256 checksum

4c1cf1f6dfee8a8d2252d532bd93ec41b28238d6ec958c4dfe0f0502b8141e09

Release notes

=== Remark ===

To be able to use the mobile devices in Corporate Network mode, after updating to v1.5, the user needs to check "Enable over LAN". Please refer to https://www.barco.com/en/support/knowledge-base/KB5281

=== Things we fixed ===

When upgrading a CS-100 or CSE-200 Base Unit to 1.05.00 and network connected, in a non /24 network, the base unit will not have the correct subnet mask (as DHCP client) resulting in the Base Unit not being reachable - by CMGS or ClickShare Configurator. This results in the base units’ web UI not being reachable anymore and the buttons not being able to reach the base unit in Corporate Network Integration. Updating will require one to have a device in the same subnet as the Base Unit or update through a USB thumb drive.
When upgrading from 01.05.00 to a higher version the base unit may not accept the update (workaround: enable Allow firmware downgrade and the update will continue)

v1.5.0.12 14 Dec 2017 (363 MB)

Download

SHA256 checksum

a6cdef5cd43cde941be8e2ccd258372efe48a5b4c06268cf36ab5eca7ab06c9b

Release notes

=== Remark ===
When upgrading CSE-200 to 1.05 and network connected, in a non /24 network, the base unit will not have the correct subnet mask (as DHCP client) resulting in the Base Unit not being reachable. This results in the base units’ web UI not being reachable anymore and the buttons not being able to reach the base unit in Corporate Network Integration. The team is working on a 1.5.1 release which will include a fix for this problem. Updating will require one to have a device in the same subnet as the Base Unit or update through a USB thumb drive.

=== What's new in this release ===

Start your meeting quicker
The time before a Button is ready to share when plugged into a personal computer has been drastically reduced with 30%. That's a lot more time to share brilliant ideas or work on bright outcomes.
Perform during your meeting
Enjoy real end-to-end 30 frames per second with audio and video in perfect harmony. Our adaptive algorithm makes sure you can stun your audience during your meeting.
Plug and update
Download the update for your Base Unit from the Barco website. Extract the zip file and put it on a USB stick without re- naming. Plug the USB into your Base Unit and enjoy the newest release. Of course, you can also update your fleet using the auto-update functionality or the Collaboration Management Suite. This is only applicable after updating to 1.5.
Auto-discovery
Adding your Base Unit to the Collaboration Management Suite has never been easier. Now all our CSE-range Base Units support auto discovery when plugged into the network and running the Collaboration Management Suite centrally.
Mixed mode
Sharing through mobile devices has never been easier. You can now enjoy sharing over the wire while the Buttons still connect to the Base Unit directly. Hence without configuring network integration. To do so, simply browse to the Services page on the ClickShare Configurator WebUI and select "Enable over LAN".

=== Things we fixed ===

(Alpha)numeric passcode
- We now use the standard passcode support included in the Airplay protocol. But it left us no choice then to drop the alphanumeric passcode, which is officially not supported. Hence security level 2 now uses numeric passcodes by default.
And a lot more
- Added the ability to retrieve the MAC address of the Button via the ClickShare Configurator webUI
- Fixed an issue where the ClickShare Button Client crashed on macOS
- Fixed an issue where an update would fail until reboot
- Fixed an issue where the auto-update server could not be reached if the Base Unit had a manual IP configuration
- Fixed an issue where the IP address of the Ethernet interface was not displayed on screen
- Fixed an issue where the Button sometimes was unable to connect to the Base Unit.
- Fixed an issue where the notifications on Windows or macOS were wrongly displayed because of a long meeting room name
- The following CVE's have been fixed with respect to the Krack Attack vulnerability
  CVE-2017-13077: Reinstallation of the pairwise encryption key (PTK-TK) in the 4-way handshake.
  CVE-2017-13078: Reinstallation of the group key (GTK) in the 4-way handshake.
  CVE-2017-13079: Reinstallation of the integrity group key (IGTK) in the 4-way handshake.
  CVE-2017-13080: Reinstallation of the group key (GTK) in the group key handshake.
  CVE-2017-13081: Reinstallation of the integrity group key (IGTK) in the group key handshake.

v1.4.2.12 13 Sep 2017 (363 MB)

Download

SHA256 checksum

d6e313fbfb576d733555bccf9b7f90fff3eeb7c50bcd9a977184125c065f7b37

Release notes

===New feature / Improvements===

Security fixes
Support for updated component

===Remarks===

After installing software version 01.04.02 or above, it is not possible anymore to downgrade to a version prior to 01.04.02.

v1.4.0.105 23 Jun 2017 (361 MB)

Download

SHA256 checksum

daff61bbb0f92a4abd98d4517a76d7ee4439086762661b037863bb6d41888b0e

Release notes

===New feature / Improvements===

Supports Extension Pack for Extended Desktop.
Quicker Button connection time.
Improved auto-update.
Security improvements.
Channel usage indication.

===Remarks===

The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.

v1.3.4.8 04 Apr 2017 (360 MB)

Download

SHA256 checksum

e09bea228a0c099ff7a2acb8436deccd89f4910acb9b08b7e598b042f5c5f1d5

Release notes

===New feature / Improvements===

Button connection issues resolved in environments with high interference (e.g. motion detector).
Drastic reduction in connection time between the Button and Base unit in network integrated setup.
When recovering from standby mode the ClickShare will automatically become responsive.
When ClickShare screensaver is on, the Barco logo is animated.

===Remarks===

The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.

v1.3.1.5 26 Sep 2016 (344 MB)

Download

SHA256 checksum

791e2b3c750d770ee4fa194d83bcd428370031c1165248e013a922867ec71656

Release notes

===New feature / Improvements===

Support for Mac OSX Sierra 10.12.
Support for Buttons without certificate (article number R9861006D01). Pairing Buttons between CSE-200 and CSM-1/CSC-1 requires the latest firmware versions on these devices (01.06.01.0004/01.09.02.0003).

===Remarks===

When updating from 01.02.01.0001 to this release, the Base Unit will not have a fixed IP after the automatic reboot. You will need to manually reboot again or update via version 01.02.02.003.
The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
This release supports the ClickShare app version 2.0.2 and higher.
This release supports the mirrorOp app version 2.0.2 and higher.

Important notice for updating to software version 01.02 or above

After installing CS-100 software version 01.02 or above, it is not possible anymore to downgrade to a version prior to 01.02 due to a security and update fix.

v1.3.0.29 29 Jul 2016 (342 MB)

Download

SHA256 checksum

bb8378682ae354ce9097036edd64ed36ab796c4d2b9548bda455150b6adbaf15

Release notes

===New feature / Improvements===

Support for Buttons without certificate (article number R9861006D01). Pairing Buttons between CSE-200 and CSM-1/CSC-1 requires the latest firmware versions on these devices (01.06.01.0004/01.09.02.0003).
A web UI wizard is added for easy and quick configuration of the Base Unit.
Support for Google Cast.
Reworked security page to make clear which features are enabled/disabled in which security level.

===Fixes===

When showing presentations full screen on MAC, it may be that the previous slide is displayed or that sharing does not start.
When in network integration mode, the corporate access point should have 6Mbps datarate enabled for the Button to connect.

===Remarks===

When updating from 01.02.01.0001 to this release, the Base Unit will not have a fixed IP after the automatic reboot. You will need to manually reboot again or update via version 01.02.02.003.
The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
This release supports the ClickShare app version 2.0.4 and higher.
This release supports the mirrorOp app version 2.0.4 and higher.

Important notice for updating to software version 01.02 or above

After installing CSE-200 software version 01.02 or above, it is not possible anymore to downgrade to a version prior to 01.02 due to a security and update fix.

v1.2.2.3 19 May 2016 (365 MB)

Download

SHA256 checksum

869d4d739f94b25e5778594b8821dadf7b86dae00a65e81936a806102e75c0e6

Release notes

===Fixes===

Button connection failure when name contains non-ascii characters.
Audio distortion over HDMI if resolution higher than fullHD.
Base unit only accessible via same subnet when using static IP.

===Remarks===

Buttons without certificate (article number R9861006D01) are not supported yet.
The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
This release supports the ClickShare app version 2.0.4 and higher.
This release supports the mirrorOp app version 2.0.4 and higher.

Important notice for updating to software version 01.02

After installing CSE-200 software version 01.02 or above, it is not possible anymore to downgrade to a version prior to 01.02 due to a security and update fix.

v1.2.1.1 02 May 2016 (386 MB)

Download

SHA256 checksum

5448a64d2fbde4fc8a78146840d51f259fe0488333a017eac92209010eae9484

Release notes

===New Features/Improvements===

Fixed a problem on device bootup
Pin code support for mobile apps and airplay.
Support for corporate network integration
RESTAPI
Web interface change: Control interface page and sharing protocols page are now combined in services page.
Stability improvements.
Security improvements.
Localisation improvements.

===Fixes===

Static IP setting doesn't always work.
Base Units will always identify with hostname "clickshare" on network.
Sometimes the log files are not downloaded. It will show an empty zip file instead of a tar.gz file with content. In that case the downloading needs to be done again.
It can take some time (more than 1 minute) before the Button can connect to the Base Unit. It happens more in cases when there was a disconnection between Base Unit and Button.
Security fix: CVE-2015-7547.

===Remarks===

Buttons without certificate (article number R9861006D01) are not supported yet.
The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
This release supports the ClickShare app version 2.0.4 and higher.
This release supports the mirrorOp app version 2.0.4 and higher.

Important notice for updating to software version 01.02

After installing CSE-200 software version 01.02 or above, it is not possible anymore to downgrade to a version prior to 01.02 due to a security and update fix.

v1.2.0.1 08 Apr 2016 (364 MB)

Download

SHA256 checksum

24aece5a33561a90c1bd3014ce0eea5bffcd639dff1e3505b3d0579aa2a84d69

Release notes

===New Features/Improvements===

Pin code support for mobile apps and airplay.
Support for corporate network integration
RESTAPI
Web interface change: Control interface page and sharing protocols page are now combined in services page.
Stability improvements.
Security improvements.
Localisation improvements.

===Fixes===

Static IP setting doesn't always work.
Base Units will always identify with hostname "clickshare" on network.
Sometimes the log files are not downloaded. It will show an empty zip file instead of a tar.gz file with content. In that case the downloading needs to be done again.
It can take some time (more than 1 minute) before the Button can connect to the Base Unit. It happens more in cases when there was a disconnection between Base Unit and Button.
Security fix: CVE-2015-7547.

===Remarks===

Buttons without certificate (article number R9861006D01) are not supported yet.
The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
This release supports the ClickShare app version 2.0.4 and higher.
This release supports the mirrorOp app version 2.0.4 and higher.

Important notice for updating to software version 01.02

After installing CSE-200 software version 01.02 or above, it is not possible anymore to downgrade to a version prior to 01.02 due to a security and update fix.

v1.1.0.8 18 Feb 2016 (383 MB)

Download

SHA256 checksum

8b8afddb8bfab576ec9ed1a89bb2a41e6c4772c6ac00db09f83b19d48fbbc167

Release notes

===Changes===

Airplay support.

===Fixes===

The sharing issues when the wallpaper is disabled and audio output is set to HDMI are fixed.
Fix for: When starting to share, audio is not always immediately available. When this happens a user cannot stop sharing as long as the audio is not available.
Display resolution list is now correct when using HDMI to DVI adaptor.
On certain Client or Base Unit resolutions the mouse pointer was not correctly positioned.
The mouse cursor displayed by the Base Unit is now always matching the one of the laptop.
There are less transition artifacts when going from one user to two users on screen and vice versa.
Proxy settings are working now.
Improved MAC client stability.
When standby and screensaver time out are set identically the screen will not constantly switch on and off anymore.
Some laptops have problems using extended desktop mode. e.g. not being able to switch back to primary screen.

===Remarks===

Buttons without certificate (article number R9861006D01) are not supported yet.
The Base Unit web interface uses a self-signed certificate. The browser will not trust this certificate and display a warning. The certificate can be added to the trust zone setting in your browser.
This release supports the ClickShare app version 2.0.4 and higher.
This release supports the mirrorOp app version 2.0.4 and higher.

Software

ClickShare CSE-200 base unit firmware

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes

SHA256 checksum

Release notes