7.2 System setup sequence

Set up from A to Z

This section provides a top level view of the entire Event Master series processor setup procedure, plus links to each individual sequence.

Note: For the optimum Event Master series processor setup, it is recommended that you follow all procedures in the order outlined below.
Set up from A to Z
  1. Power up and Status check. For more information see section “Power up and Status check”.
  2. Return to factory default. For more information see section “Return to factory default”.
  3. Communication setup allows setup to the Ethernet settings. For more information see section “Communication setup”.
  4. Restoring the system procedure restores the system to a previously saved configuration from a USB drive. For more information see section “Restoring the system”.
  5. User preference setup is used to set a variety of important user preferences. For more information see section “User preference setup”.
  6. Saving the setup procedure saves all system setup parameters. For more information see section “Saving the setup”.
  7. Backing up the system procedure backs up your system configuration to a USB drive. For more information see section “Backing up the system”.
  8. Configuring Menu > Initial Setup. For more information see section “Configuration Menu > Initial Setup ”.
  9. Configuring Menu > Add Inputs. For more information see section “Configuration Menu > Add Inputs”.
  10. Configuring Menu > Add Outputs. For more information see section “Configuration Menu > Add Outputs”.
  11. Configuring Menu > Add Screen Destinations & Layers. For more information see section “Configuration Menu > Add Screen Destinations & Layers”.
  12. Configuration Menu > Layer optimization. For more information see section “Configuration Menu > Layer optimization”.
  13. Configuring Menu > Add Aux Destinations. For more information see section “Configuration Menu > Add Aux Destinations”.
  14. Configuring Menu > Add MVR Outputs. For more information see section “Configuration Menu > Add MVR Outputs”.
  15. Programming Menu > Capture Stillstore from Inputs. For more information see section “Programming Menu > Capture Stillstore from Inputs”.
  16. Programming Menu > Select Thumbnails for Inputs. For more information see section “Programming Menu > Select Thumbnails for Inputs”.
  17. Programming Menu > Create Sources from Inputs. For more information see section “Programming Menu > Create Sources from Inputs”.
  18. Programming Menu > Drop backgrounds into Screen Destinations. For more information see section “Programming Menu > Drop backgrounds into Screen Destinations”.
  19. Programming Menu > Drop Layers into Screen Destinations & Sources into layers. For more information see section “Programming Menu > Drop Sources, Layers into Screen Destinations & Sources into layers”.
  20. Programming Menu > Drop Inputs to Aux Destinations. For more information see section “Programming Menu > Drop Inputs to Aux Destinations”.
  21. Programming Menu > Presets And User Keys. For more information see section “Programming Menu > Presets And User Keys”.
  22. Programming Menu > Destination Transition. For more information see section “Programming Menu > Destination Transition”.
  23. Multiviewer Menu > Drop Inputs and Destinations. For more information see section “Multiviewer Menu > Drop Inputs and Destinations ”.