Rear-projection cube upgrade kits

Prolong the lifetime of your RPC video wall

Get a brighter, sharper, quieter wall – without touching the frame you already own.

Your video wall has been running for years, and it still does the job. But lamp and LED engines fade. Colors drift. Maintenance calls get more frequent. Replacing the entire wall feels like overkill when the real problem is just the light source.

That's exactly the gap RGB Laser upgrade kits close. Barco fits a new RGB Laser projection module into the mechanical structure you already have, so the wall you invested in keeps working, only better. At a much lower cost than a completely new installation.

icons for landing page upgrade rpc rear-projection video wall cubes to rgb laser

More light, less electricity

RGB Laser delivers roughly double the brightness of the lamp or LED engine it replaces, while cutting power consumption by up to 50% at higher brightness levels. That combination is rare: most technology upgrades trade one for the other.

Color that holds up

Lamp and LED sources lose saturation over time. RGB Laser holds its color point for the long run, giving you deeper, more accurate colors, sharper focus, and stronger contrast from day one to year ten.

Built to run, and run quiet

RGB Laser modules are rated for a longer operational lifetime, including 24/7 use. And they do it at a noise level Barco describes as "library quiet," about 25% quieter than the previous generation.

How the upgrade works

No new wall. No new frame. No downtime.

The RGB Laser module slots into your existing mechanical structure, so there's zero architectural or physical impact on your control room, studio, or venue. Installation takes 50% less effort thanks to motorized 7-axis alignment, and the upgrade can be performed without taking the system offline.

If your wall is a 50", 67", 70" or 80" cube running on lamp or LED, it's very likely a candidate. Check the spec overview for your exact model.

Your wall isn't done yet. Give it the light source it deserves.

View full spec overview

Smarter calibration, built in

Every upgrade kit brings your wall onto Sense X, Barco's current automatic calibration technology, replacing the older Sense6 generation. Sense X continuously monitors and corrects color and brightness in real time, so tiles stay matched to each other automatically, without manual re-calibration. Combined with redundancy on critical components, it's a system built to be left alone and simply trusted.

The bottom line

	Lamp/LED (before)	RGB Laser (after)
Brightness	Baseline	Up to 2x higher
Power draw	Baseline	Up to 50% lower
Noise level	Baseline	~25% quieter
Calibration	Sense6	Sense X (automatic, real time)
Installation effort	Baseline	50% less

Lower total cost of ownership. Higher image quality. A wall that's ready for years of extra service. That's the upgrade, in one table.

Many years of additional service, at much lower costs, without infrastructural works. Sounds too good to be true? It's not. Contact us to see what we can do for your organization.

Talk to us

Don't hesitate to contact us with your questions. Our team will gladly point you in the right direction.

Upgrade to an RGB Laser video wall