Produkte
Njord Cinemascope

Njord Cinemascope

Njord Cinemascope has a pleasing calm uniform image and is designed for large screens or high ambient light environments.

  • Theater & Media Room Series
  • 5K UHD Resolution (5,120 x 2,160)
  • 3-Chip DLP
  • Up to 9,000 ANSI Lumens

Listenpreis:

(ohne Mehrwertsteuer, Zölle und Fracht)

Preis nicht verfügbar

R9010036

Njord CinemaScope

Produktsupport anfordern

Njord Cinemascope inherits everything from Njord except the aspect ratio, Njord Cinemascope's high-capacity 2.37:1 aspect DLP engine. Its exceptional design allows a cinemascope film to be shown without requiring an anamorphic lens. The light source and optical engine are completely redesigned, made smaller, more efficient, and most importantly optimized for perfect cinematic colors comapred to the older model Wodan.

 

Our Njord Cineascope features a pleasing and uniform image with the power light up large cinemascope screens, whilst delivering an unbelievably detailed image with spectacular color fidelity for an unmatched experience that will delight even the most discerning clients.

 

Single Step Processing SSP™

Pulse is a hardware and software based platform that simplifies the signal allowing it to transmit from source to screen much faster and more efficiently.  We use an advanced image processing technique to display the image on the screen without any artefacts and with the lowest possible processing lag (<20ms with all image processing), this is made possible by our Single Step Processing (SSP™).

State of the art electronics 

All new Pulse electronics have been designed to process 4K with HDMITM 2.0a and HDCP 2.2 and the optical engine utilises the very latest 0.9" DMD DLP chipset, delivering 5,120 x 2,160 pixels to screen.

Njord CS also features HDR, motorised lenses and Barco’s unique RealColor processing, enables simple and accurate calibration to any desired color standard or white point.

Building Blocks

Njord Cinemascope offers 5K UHD resolution (5,120 x 2,160) for superb image quality. Thanks to its modular design of only five building blocks, Njord CS is easy to service. Njord CS is the most compact and rugged cinemascope projector offering 9,000 lumens light output currently available. 

Laser Light Source

Outstanding image quality also requires an exceptional light source which is why we designed Njord CS with a brand new laser engine, significantly improving image uniformity (95%) over its predecessor. Njord CS uses custom selected lasers to secure that we can deliver DCI/P3 color gamut.

 

Lasers last longer than traditional projector lamps, are not as fragile and offer nearly instant on/off.

Allgemeine technische Daten
Projektortyp
Three chip DLP
Technologie
3 x 0.90" DMD™ with sealed core
Auflösung
5120 x 2,160 (5K UHD)
Bildseitenverhältnis
2.37:1 (CinemaScope)
Lichtquelle
Laser phosphor
Lebensdauer der Lichtquelle
Up to 20,000
Lichtausgabe
Up to 9,000 ANSI Lumems
Dimable to 4,000 lumens

 

NOTE: Up to 6,940 ANSI Lumems @ 110v
CLO (Constant Light Output - Konstante Lichtausgabe)
Yes
Kontrast
20,000:1 (with DynaBlack enabled)
2,000:1 Sequential
600:1 ANSI
Helligkeitsgleichförmigkeit
>90%
Objektivbereich
(R9801661) - TLD+ (0.41:1) - 90 Degree Lens
(R9862001) - TLD+ (0.73 - 0.94:1) - 90 Degree Lens
(R9801414) - TLD+ (0.92 - 1.33:1)
(R9862005 ) - TLD+ (1.24 - 1.56:1)
(R9862010) - TLD+ (1.49 - 2.02:1) *
(R9862020) - TLD+ (2.01 - 2.76:1) *
(R9862030) - TLD+ (2.69 - 4.41:1) *
(R9862040) - TLD+ (4.37 - 7.35:1) *
(R9829997) - TLD+ (6.95 - 10.83:1)

* Standard Lens Option(s)
Linsenverstellung
Up to 97% shift up, 76% down, & up to 28% horizontal lens shift (depending on lens selection) Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here
Optischer Dowser
Yes
Farbkorrektur
P7 RealColor™
Farbskala
Up to DCI (P3)
Bildverarbeitung
Embedded Warp & Blend Engine
WARP
4-Corner Warp & Bow Correction via Warp Engine
Ausrichtung
360° Rotation
Netzwerk-Verbindung
10/100 Ethernet via RJ45 connection
Integrierter Webserver
Yes
Diagnose
via Prospector web interface
HDR
HDR10
3D
Active Stereoscopic 3D
Additional hardware required please contact an authorized Barco representative for details
Eingänge
1 x HDMITM 2.0 (HDCP 2.2)
2 x HDBaseT (HDCP 1.4 - 9Gbps only)
1 x Display Port 1.2
Quad 3G / 12G SDI / BarcoLink 1 x RJ45 Ethernet
1 x RS232
1 x USB
2 x DMX (1 x Input / 1 x Output)
1 x XLR for Wired Remote
2 x 3D Sync (1 x Input / 1 x Output) Optional Upgrade: Quad DP1.2
Eingangsauflösungen
HDMITM:
Up to 4,096 x 2,160 @ 24/25/30/50/60Hz

DisplayPort (Single Input):
Up to 4,096 x 2,160 @ 24/30/50/60Hz


via Optional Quad DP1.2 Input Card

DisplayPort (Layout Mode: 2 x 2) *:
Up to 1,920 x 1,080 @ 120Hz
Up to 2,048 x 1,080 @ 120Hz

DisplayPort (Layout Mode: 4 x 1) *:
Up to 960 x 2,160 @ 120Hz

* Specialist GFX cards may be required
Latenz
TBD
Bedienung
IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant WiFi (Optional), XLR Wired Remote, GSM (Optional)
Stromversorgungsanforderungen
110 - 130V / 200 - 240V / 50 - 60Hz
Stromverbrauch

110V: 1,347W Max, measured in 20-25°C / 68-77°F

230V: 1720W Max 20-25°C / 68-77°F

Power consumption will increase if ambient temperatures increses above 25°C / 77°F

Geräuschentwicklung (typisch bei 25 °C/77 °F)
46 dB(A)
Betriebstemperatur
0 to 40 °C at Sea Level
Optimal Set Point: 20 °C
Betriebsfeuchtigkeit
0 to 80% (relative humidity)
BTU pro Stunde
Max. 5,875 BTU/h @ 200 - 240V
Max. 4,599 BTU/h @ 110 - 130V
Anforderungen Luftstrom
Air Inlet (from Rear w/Feet Down): Front / Top / Right
Exhaust (from Rear w/Feet Down):  Rear Clearance Requirements:
Front: 40cm
Left: 1cm
Right: 40cm
Rear: 40cm
Top: 40cm
Abgasstrom
152 ft3/min @ 25 °C
258 m3/hour @ 25 °C Download Lens & Airflow Data Here
Abmessungen (BxTxH)
Excluding Lens
540 x 725 x 355 mm
21.26 x 28.54 x 14 in.
Gewicht
Excluding Lens
48kg / 105bs
Versandabmessungen (BxLxH)
Including Pallet - Excluding Lens (Packaged Separately)
850 x 665 x 613 mm
33.46 x 26.18 x 24.13 in.
Versandgewicht
TBD
Standardzubehör
Power Cord / Remote Control
Zertifizierungen
CE, FCC Class A and cCSAus
Sicherheitsanforderungen
This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 2.3 is installed. Refer to the installation manual for further information.
Gewährleistung
Limited 3 years parts and labor
Extendable up to 5 years
*
Firmware upgradable
Please contact an authorized Barco representative for details

Objektive
TLD+ (1,39–1,89:1 WU/HD) (1,49–2,03:1 WQ/4KUHD) (1,5–2,0:1 SXGA+) (1,3–1,75:1 2K/4K 0,98" DMD)
TLD+ (1,39–1,89:1 WU/HD) (1,49–2,03:1 WQ/4KUHD) (1,5–2,0:1 SXGA+) (1,3–1,75:1 2K/4K 0,98" DMD)
TLD+-Objektiv (1,39–1,87:1 WUXGA) (1,48–2,0 WQ/4KUHD) (1,5–2,0:1 SXGA+)
TLD+ (1,89–2,55:1 WU/HD) (2,02–2,73:1 WQ/4KUHD) (2,0–2,8:1 SXGA+) (1,75–2,4:1 2K/4K 0,98" DMD)
TLD+ (1,89–2,55:1 WU/HD) (2,02–2,73:1 WQ/4KUHD) (2,0–2,8:1 SXGA+) (1,75–2,4:1 2K/4K 0,98" DMD)
TLD+-Objektiv (1,87–2,56:1 WUXGA)(2,0–2,76 WQ/4KUHD) (2,0–2,8:1 SXGA+)
TLD+ (2.56-4.13:1 WU/HD) (2.74-4.43:1 WQ/4KUHD) (2.8-4.5:1 SXGA+) (2.4-3.91:1 2K/4K 0.98" DMD)
TLD+ (2.56-4.13:1 WU/HD) (2.74-4.43:1 WQ/4KUHD) (2.8-4.5:1 SXGA+) (2.4-3.91:1 2K/4K 0.98" DMD)
TLD+ (4,17–6,97:1 WU/HD) (4,42–7,46 WQ/4KUHD) (3,91–7,5:1 SXGA+) (3,91–6,52:1 2K/4K 0,98" DMD)
TLD+ (4,17–6,97:1 WU/HD) (4,42–7,46 WQ/4KUHD) (3,91–7,5:1 SXGA+) (3,91–6,52:1 2K/4K 0,98" DMD)
TLD+ (6,92–10,21:1 WU/HD) (7,41–11,03 WQ/4KUHD) (7,5-11,2:1 SXGA+) (6,5–9,66:1 2K/4K 0,98" DMD)
TLD+ (6,92–10,21:1 WU/HD) (7,41–11,03 WQ/4KUHD) (7,5-11,2:1 SXGA+) (6,5–9,66:1 2K/4K 0,98" DMD)
TLD+ Ultra (0,86–1,25:1 WU/HD) (0,93–1,33:1 WQ/4KUHD) (0,86–1,25:1 SXGA+) (0,8–1,16:1 2k/4K 0,98" DMD)
TLD+ Ultra (0,86–1,25:1 WU/HD) (0,93–1,33:1 WQ/4KUHD) (0,86–1,25:1 SXGA+) (0,8–1,16:1 2k/4K 0,98" DMD)
TLD+ Ultra (1,17–1,50:1 WU/HD) (1,25–1,60:1 WQ/4KUHD) (1,25–1,6:1 SXGA+) (1,09–1,4:1 2k/4K 0,98" DMD)
TLD+ Ultra (1,17–1,50:1 WU/HD) (1,25–1,60:1 WQ/4KUHD) (1,25–1,6:1 SXGA+) (1,09–1,4:1 2k/4K 0,98" DMD)
TLD+-Objektiv (0,39:1 WU/HD) (0,42:1 WQ/4KUHD) (0,38:1 2K/4K 0,98" DMD)
TLD+-Objektiv (0,39:1 WU/HD) (0,42:1 WQ/4KUHD) (0,38:1 2K/4K 0,98" DMD)
TLD+-Objektiv (0,39:1 WU/HD) (0,42:1 WQ/4KUHD)
TLD+-Objektiv (0,67–0,88:1 für WU/HD) (0,71–0,93:1 WQ/4KUHD) (0,64–0,82:1 2K/4K 0,98" DMD)
TLD+-Objektiv (0,67–0,88:1 für WU/HD) (0,71–0,93:1 WQ/4KUHD) (0,64–0,82:1 2K/4K 0,98" DMD)
TLD+-Objektiv (0,67 – 0,88:1 für WU/HD) (0,71 – 0,93:1 WQ/4KUHD)

Sie finden nun alle Medien, Broschüren, Präsentationen, Whitepaper & Marketingdownloads in unserem neuen und verbesserten Download-Center.

Mediencenter besuchen

Auf der Suche nach technischen Dokumenten oder Support für unsere Produkte?

Wenn Sie nach technischen Downloads wie Treibern, Firmware, Bedienungsanleitungen, Zeichnungen & Dokumentationen suchen, würden wir Sie bitten, diese direkt auf unserer Produktsupportseite abzurufen.

Zum Produktsupport