Balder CinemaScope

一般仕様

プロジェクタータイプ

Single chip DLP

光源寿命

20,000 - 60,000 hours
Laser intensity dependent

CLO（定常光出力）

Yes

光学ダウザー

Yes

テクノロジー

0.9" DMD™

統合ウェブサーバー

Yes

解像度

5,120 x 2,160 (5K UHD)

診断

via Prospector web interface

アスペクト比

2.37:1 (CinemaScope)

光源

Laser phosphor

光出力

DCI (P3) Color Wheel: Up to 3,600 ANSI lumens
T Color Wheel: Up to 4,000 ANSI lumens
M Color Wheel: Up to 56000 ANSI lumens

コントラスト比

1,800:1 Sequential
450:1 ANSI

明るさの均一性

>90%

入力解像度

From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
or up to 2,560 x 1,600 @ 120Hz

レンズの範囲

(R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation)
(R9801832) - FLDX UST (0.41:1) - 90° Lens
(R9802244) - EN67 (0.65:1)
(R9802243) - EN66 (0.80 - 1.21:1)
(R9802003) - EN76 (0.95 - 1.30:1)
(R9802242) - EN63 (1.20 - 1.70:1) *
(R9802241) - EN61 (1.70 - 2.50:1) *
(R9801211) - EN44 (2.50 - 4.60:1)

* Standard Lens Option(s)

レイテンシー

TBD

光学レンズシフト

Up to 122% vertical lens shift & up to 40% horizontal lens shift (depending on lens selection)

Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here

色補正

P7 RealColor™

スタンバイ電力

Standby ECO Mode:
110v - 0.73W (with LAN Connection)
230v - 0.82W (with LAN Connection)

色域

DCI (P3) Color Wheel: DCI P3
T Color Wheel: REC.709
M Color Wheel: REC.709

画像処理

Embedded Warp & Blend Engine

WARP

4-Corner Warp & Bow Correction via Warp Engine

向き

360° Rotation

ネットワーク接続

10/100 Ethernet via RJ45 connection

動作湿度

20 to 80% (relative humidity)

HDR

HDR10

3D

Active Stereoscopic 3D
Additional hardware required please contact an authorized Barco representative for details

入力

1 x HDMI^TM 2.0 (HDCP 2.2)
1 x HDBaseT (HDCP 1.4 - 9Gbps only)
2 x Dual Link DVI-D
2 x Display Port (1.2)
12G-SDI 1 x RJ45 Ethernet
1 x RS232
1 x Remote Control (RC)
3 x USB (2 x Rear, 1 x Front)
DMX (1 x Input, 1 x Output)

配送寸法

Excluding Lens
730 x 600 x 480 mm
28.7 x 23.7 x 18.9 in.

制御

IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them.
Download our integration guide for more information.

出荷重量

Excluding Lens
43 kg / 94.8 lbs

電源要件

100 - 240V / 50 - 60Hz

標準付属品

Power Cord, Remote Control

証明書

CE, FCC Class A and cCSAus

消費電力

1,100 W - Max.

騒音レベル（25°C/77°Fの標準値）

36 dB(A)

24時間連続使用に対応

This projector is designed and warranted for heavy duty 24/7 operation.
Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications.

動作温度

10 to 45 °C at Sea Level
Optimal Set Point: 20 °C

動作湿度

20 to 80% relative humidity

*

Firmware upgradable
Please contact an authorized Barco representative for details

BTU/時間

4,000 BTU/h - Max.

エアフロー要件

Air Inlet (from Rear w/Feet Down):  Right Side
Exhaust (from Rear w/Feet Down):  Rear Clearance Requirements:
Front: 1cm
Left: 1cm
Right: 50cm
Rear: 100cm
Top: 1cm

排気流

112 ft³/min @ 25 °C
190 m³/hour @ 25 °C
Download Lens & Airflow Data Here

寸法（幅x長さx高さ）

Excluding Lens
475 x 588 x 286 mm
18.7 x 23.1 x 11.3 in.

重量

Excluding Lens
37 kg / 81.5 lbs

保証

Limited 3 years parts and labor
Extendable up to 5 years

安全要件

This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 6.0 is installed. Refer to the installation manual for further information.