Loki CinemaScope

Offering the same UHD enhancements as the Loki projector, coupled with a high-capacity 2.37:1 aspect DLP engine.

Loki CinemaScope

Offering the same UHD enhancements as the Loki projector, coupled with a high-capacity 2.37:1 aspect DLP engine.

Theater & Media Room Series
5K UHD Resolution (5,120 x 2,160)
Laser Phosphor
Up to 7,800 ANSI Lumens

R9021012

Loki CinemaScope

Loki CinemaScope's exceptional design allows a cinemascope film to be shown without requiring an anamorphic lens. The projector also provides Barco’s renowned single-step processing (SSPTM) and low latency scaling technologies.

Professional grade optics

By basing Loki CinemaScope on a proven optical architecture, custom designed aspherical glass elements and enhanced low dispersion glass lenses, image quality is in a class of its own. Contrast is not only increased, but the details within the darkest parts of the image are more visible.

CinemaScope

Our unique aspect ratio detection system, automatically crops and scales content to fit the appropriate screen area, ranging from 1.78:1 to 2.39:1.

Manual cropping is also available for custom configurations such as cinemascope subtitle support, where only the top black bar is removed from none 1.78:1 content, preserving the subtitles at the foot of the image.

Laser light source

Outstanding image quality requires an exceptional light source, which is why Loki Cinemascope uses our brand-new dual laser engine.

Alongside significantly improved image uniformity, lasers last longer than traditional projector lamps, offer great image quality consistence over their lifetime, are less fragile and offer near instant on/off performance.

Liquid cooling

Loki Cinemascope has departed from a pure fan based cooling system, opting instead for a liquid cooling PID regulation system. This combined with our simulation grade warp engine allows Balder to operate at any angle (free rotation), offering new possibilities when it comes to architectural integration.

Specifications

Download spec sheet

General specifications

Projector type: Single chip DLP

Technology: 0.9" DMD™

Resolution: 5,120 x 2,160 (5K UHD)

Aspect ratio: 2.37:1 (CinemaScope)

Light source: Laser phosphor

Light source lifetime: 20,000 - 60,000 hours
Laser intensity dependent

Light output: DCI (P3) Color Wheel: Up to 5,100 ANSI lumens
T Color Wheel: Up to 6,500 ANSI lumens
M Color Wheel: Up to 7,800 ANSI lumens

CLO (constant light output): Yes

Contrast ratio: 1,800:1 Sequential
450:1 ANSI

Brightness uniformity: >90%

Lens range: (R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation)
(R9801832) - FLDX UST (0.41:1) - 90° Lens
(R9802244) - EN67 (0.65:1)
(R9802243) - EN66 (0.80 - 1.21:1)
(R9802003) - EN76 (0.95 - 1.30:1)
(R9802242) - EN63 (1.20 - 1.70:1) *
(R9802241) - EN61 (1.70 - 2.50:1) *
(R9801211) - EN44 (2.50 - 4.60:1)

* Standard Lens Option(s)

Optical lens shift: Up to 122% vertical lens shift & up to 40% horizontal lens shift (depending on lens selection)
Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here

Optical dowser: Yes

Color correction: P7 RealColor™

Color gamut: DCI (P3) Color Wheel: DCI P3
T Color Wheel: REC.709
M Color Wheel: REC.709

Image processing: Embedded Warp & Blend Engine

WARP: 4-Corner Warp & Bow Correction via Warp Engine

Orientation: 360° Rotation

Network connection: 10/100 Ethernet via RJ45 connection

Integrated web server: Yes

Diagnostics: via Prospector web interface

HDR: HDR10

3D: Active Stereoscopic 3D
Additional hardware required please contact an authorized Barco representative for details

Inputs: 1 x HDMI 2.0 (HDCP 2.2)
1 x HDBaseT (HDCP 1.4 - 9Gbps only)
2 x Dual Link DVI-D
2 x Display Port (1.2)
12G-SDI 1 x RJ45 Ethernet
1 x RS232
1 x Remote Control (RC)
3 x USB (2 x Rear, 1 x Front)
DMX (1 x Input, 1 x Output)

Input resolutions: From VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
or up to 2,560 x 1,600 @ 120Hz

Latency: TBD

Control: IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant NOTE: 12v Trigger(s) do not follow standard functionality and require an IP command to enable / disable them.
Download our integration guide for more information.

Power requirements: 100 - 240V / 50 - 60Hz
US Requires: 20A Service (NEMA 5-20P Plug Type

Power consumption: 2180 W - Maximum

BTU per hour: Max. 6,000 BTU/h

Standby power: Standby ECO Mode:
110v - 0.78W (with LAN Connection)
230v - 0.87W (with LAN Connection)

Noise level (typical at 25°C/77°F): 38 dB(A)

Operating temperature: 10 to 45 °C at Sea Level
Optimal Set Point: 20 °C

Operational humidity: 20 to 80% (relative humidity)

Airflow requirements: Air Inlet (from Rear w/Feet Down): Right Side
Exhaust (from Rear w/Feet Down): Rear Clearance Requirements:
Front: 1cm
Left: 1cm
Right: 50cm
Rear: 100cm
Top: 1cm

Exhaust airflow: 193 ft³/min @ 25 °C
327 m³/hour @ 25 °C
Download Lens & Airflow Data Here

Dimensions (WxLxH): Excluding Lens
577 x 738 x 304 mm
22.7 x 29.1 x 12 in.

Weight: Excluding Lens
44.5 kg / 98.1 lbs

Shipping Dimensions: Excluding Lens
720 x 910 x 630 mm
28.4 x 35.8 x 24.8 in.

Shipping weight: Excluding Lens
55kg / 121.3 lbs

Storage temperature: -20 to 60 °C

Storage humidity: 10 to 90% (relative humidity)

Standard accessories: Power Cord, Remote Control

24/7 operation: This projector is designed and warranted for heavy duty 24/7 operation.
Specific measures and design considerations have been made in order for it to comply with stringent requirements in challenging applications.

Certifications: CE, FCC Class A and cCSAus

Safety requirements: This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 3.15 is installed. For Northern America, installation requirements according to Risk group 3 (RG3) must be followed when interchangeable lens with throw ratio greater than 2.33 is installed. Refer to the installation manual for further information.

Warranty: Limited 3 years parts and labor
Extendable up to 5 years

*: Firmware upgradable
Please contact an authorized Barco representative for details

You can now find all media, brochures, presentations, whitepapers & marketing downloads in our new & improved download center

Visit Media Center

Looking for technical documents or product support?

For technical downloads such as drivers, firmware, manuals, drawings & documentation we would kindly like to direct you to our product support page.

Go to product support

Loki CinemaScope

Loki CinemaScope

Loki CinemaScope

Professional grade optics

CinemaScope

Laser light source

Liquid cooling

Specifications

General specifications

Marketing Material

Looking for technical documents or product support?