ClickShare Conference (CX-20, CX-30, CX-50) in combination with Poly Studio X or G series videobars offers a very high quality Bring Your Own Meeting (BYOM) experience to flexible room environments. CX-50 Gen2 expands the capabilities with automatic Appliance/Device Mode switching to simplify the meeting workflow.
ClickShare Conference offers wireless, easy-to-use, agnostic content sharing and conferencing from laptops. Poly Studio X or G series provide a room-based experience for MTR and other UC services (Appliance Mode) in addition to Device Mode whereby the audio and video peripherals can be used in a UC client on a laptop. Besides premium quality audio and video, the meeting experience is enhanced by blocking out distractions with Poly MeetingAI features, including Poly’s NoiseBlockAI machine learning audio algorithms. Poly’s DirectorAI makes the user feel connected with production-quality camera framing and tracking to capture the best angle of a speakers face regardless of where they are in the room. All the capabilities of ClickShare Conference and Poly Studio X or G series devices come together to create meeting equity for hybrid environments.
Poly Studio X or G series devices, in combination with ClickShare Conference solutions, are designed to be used in either Device Mode or Appliance Mode with Poly, Microsoft Teams (MTR) and other UC room deployments. When combined, a simple switch to Device Mode is possible via the TC8 controller or automatically when using a CX-50 Gen2.
Remark: The main goal of this article and the related articles is to provide recommended setups and use cases. Please refer to specific product documentation (installation and reference manuals, spec sheets, etc.) for specific product information, e.g. wiring, specific port functions and supported features and limitations.
Four different configurations with ClickShare and Poly Studio X or G series are possible, each with its own usage cases as listed below:
| Configurations | Use cases | ClickShare devices | Related articles |
|---|---|---|---|
| C and CX for wireless presentation | Agnostic content sharing to the Poly Studio X or G series in Appliance Mode Wirelessly sharing content including audio and video from any user device (laptop, mobile, tablet) | C-5/10 or CX-20/30/50 | KB9568 |
| CX for wireless conferencing as add-on to room Appliance Mode |
Agnostic wireless conferencing to the Poly Studio X or G series videobars Wirelessly sharing content (video only when videobar in Appliance mode, video and audio when videobar in Device mode) from any user device (laptop, mobile, tablet) Wireless conferencing (with any UC client) via a user laptop connected to ClickShare enabled via manual switching on Poly controller | CX-20/30/50 Gen1 | KB9569 |
| CX-50 Gen2 for automated wireless conferencing as add-on to room Appliance Mode |
Agnostic wireless conferencing to the Poly Studio X or G series videobars Wirelessly sharing content including audio and video from any user device (laptop, mobile, tablet) | CX-50 Gen2 | KB11213 |
| CX for wireless conferencing with Poly Studio X or G series videobars in Device Mode |
Wireless conferencing (with any UC client) via a user laptop connected to ClickShare | CX-20/30/50 (Gen1 and Gen2) | KB9570 |
Known Issues
Here are some known issues and their status:
- We have found this setup to be very sensitive to the cabling used to connect the Poly Studio X or G series videobars to the ClickShare CX. It requires a high-quality USB cable between the Poly and the CX device where the USB connection is applicable. In case of sporadic peripheral discovery, make sure to always check the cable first.
- Audio distortion on CX-50 with Poly Studio X or G series
This issue has been fixed in Poly 3.10 firmware. - CX-30 occasionally wakes up out of ECO standby when connected to a Poly Studio X or G series in Zoom room mode
This has been fixed with the 2.10 release. - Poly Studio X or G series device mode does not work properly when connected to ClickShare Conference
This issue has been fixed in Poly 3.9 firmware. - CX-50 Gen2 switches the Poly Studio X or G series to Device Mode when content with audio is played
This is changed with the 2.17 release whereby ClickShare Speaker will send audio over HDMI™ and not trigger a USB switch.
Note:
Always check out https://www.barco.com/en/products/clickshare-conferencing-collaboration/alliance-partners/peripherals?partner=Poly&recent=true for specific product-related remarks.
