MDDC‑2424
diagnostic display built for dental specialists
- 24" diagnostic display for dental imaging
- Front sensor for consistent images
- Automated calibration & QA
- Built-in DIN 6868-157 compliance
- Certified medical device, built for dental clinics
Dental diagnostic reading demands more than a general-purpose monitor can deliver. Reading a panoramic, a cephalometric series, an intraoral study, or a cone beam CT means catching the kind of subtle detail — a hairline root fracture, the earliest shadow of caries, a fine change in bone density — that a generic screen was never built to reveal. MDDC-2424 is designed specifically for that job: a display created so dental specialists and their practices can trust every image they read, in every room, every time.
Confidence in every detail
MDDC-2424 keeps subtle findings visible instead of lost in noise: early caries, periodontal ligament changes, hairline fractures, fine bone structure. The full study is shown in one clear view, without cropping or endless scrolling.
Quality that holds over time
Day-one quality that drifts isn’t diagnostic quality. An integrated front-of-screen sensor and QAWeb-managed calibration keep brightness and contrast stable throughout the display’s working life — predictable year after year, and uniform from one workstation to the next.
Made for the clinic, not the office
A certified medical device with a housing designed to be cleaned between patients, plus the connectivity and mounting flexibility a real dental workflow needs. It fits into clinical routine rather than complicating it.
Every dental specialty covered
MDDC-2424 supports the specialties that depend on precise imaging:
- Endodontics: gingival tissue, cortical and medullary bone, and root-end depth, with accurate grayscale reproduction.
- Prosthodontics: dependable 3D visualisation of edentulous sites for implant planning.
- Orthodontics: panoramic clarity for implants, impacted teeth, TMJ assessment and orthognathic planning.
- Periodontics: sensitivity to detect alveolar bone level changes and osseous defect architecture.
- Oral & maxillofacial surgery: the detail that reconstruction and extraction planning demand on CBCT.
Quality assurance and compliance, built in
QAWeb Enterprise, Barco’s cloud-based QA platform, automates calibration and testing across every workstation — no local server, with audit-ready reporting and enterprise-grade data protection. QAWeb for DIN 6868-157 automates acceptance and consistency testing for both dental room classes the standard defines, with compact reports for straightforward record-keeping.
Specifications
Download spec sheetGeneral Specifications
- Screen technology
- ADS
- Active screen size (diagonal)
- 24"
- Active screen size (H x V)
- 518.4 mm x 324 mm
- Aspect ratio (H:V)
- 16:10
- Resolution
- 2 MP (1920 x 1200 pixels @ 60 Hz)
- Pixel pitch
- 0.27 mm
- Color imaging
- Yes
- Gray imaging
- Yes
- Bit depth
- 8 bit per R, G, B
- Viewing angle (H, V)
- 178°
- Color Calibration(sRGB)
- Yes
- Color Gamut
- Refer to panel specification
- Front sensor (FLOS)
- Yes
- Maximum luminance (panel typical)
- 600 cd/m²
- DICOM calibrated luminance
- 350 cd/m²
- Contrast ratio (panel typical)
- 1000:1
- Response time ((Tr + Tf)/2) (typical)
- 14 ms
- Housing color
- RAL 9003
- Video input signals
- 1x DisplayPort
1x DVI-D
1x DVI-A
1x HDMI
- USB ports
- 1x USB 2.0 Type-B upstream
2x USB 2.0 Type-A downstream
- Power rating
- 12 Vdc, 5A
- Power consumption
- < 28 W
< 0.3 W (hibernate)
< 0.3 W (switched off)
- Dimensions with stand (W x H x D)
- Portrait: 383 x 577.1~629.1 x 201.3 mm
Landscape: 568 x 420.6~530.6 x 201.3 mm
- Dimensions w/o stand (W x H x D)
- 568 x 383 x 67.3 mm
- Dimensions packaged (W x H x D)
- 681 x 512 x 198 mm
- Net weight with stand
- 6.8 kg
- Net weight without stand
- 4.6 kg
- Net weight packaged
- 11.2 kg
- Tilt
- -5° to +22°
- Pivot
- 90°
- Height adjustment range
- 110 mm
- Mounting standard
- VESA (100 mm)
- Screen Protection
- All digital images, except digital mammography.
- Certifications
- CE 0123 (Medical Device)
Safety specific:
IEC 60601-1:2005 + AMD1:2012+ AMD2:2020
EN 60601-1:2006 + A1:2013 + A12:2014
IEC 62368-1:2018
EN 62368-1:2020 + A11:2020
IEC 60601-1-6:2010 + AMD1:2013 + AMD2:2020
EMC specific:
IEC 60601-1-2:2014 + A1:2020
EN 60601-1-2:2015 + A1:2021
Environmental: EU RoHS, REACH, WEEE, Packaging Directive
- Supplied accessories
- 1x DisplayPort video cable
1x USB cable
1x Printed user guide (in English, other languages can be found on the documentation disc)
1x Documentation disc
1x System sheet
Mains cable
Cable cover
Cable clamp
External power supply
- QA software
- QAWeb Enterprise, QAWeb for DIN
- Warranty
- 5 years
- Operating temperature
- 0°C to +40 °C
- Storage temperature
- -20 °C to +60 °C
- Operating humidity
- 20 % to 80 % (non-condensing)
- Storage humidity
- 10% to 80 %
- Minimum operating pressure
- 70 kPa
- Storage pressure
- 50 to 106 kPa
You can now find all media, brochures, presentations, whitepapers & marketing downloads in our new & improved download center
Visit Media CenterSimilar products
Intuitive Workflow Tools
Eonis 3D (MDRC-8127)
Eonis 19" (MDRC-1419)
Eonis 21" (MDRC-2421)
Looking for technical documents or product support?
For technical downloads such as drivers, firmware, manuals, drawings & documentation we would kindly like to direct you to our product support page.
Go to product support