Which devices are supported by Barco to work with ClickShare Hub

Article number: [15950]

Applicable to

Overview

This article gives an overview of the devices that have been tested for interoperability with the ClickShare Hub Pro and Hub Core. This overview will be updated regularly.

Devices not listed in this document have not been tested yet and are therefore not supported.
Devices must be connected to the back USB ports of the ClickShare Hub via the indicated peripheral connection.
The listed connection methods show, per connection method, the minimum supported USB protocol version and connector types.
^*Understanding connection notation
[Connector on peripheral device side] - to - [USB socket on the ClickShare Hub side]
- The first connector always refers to the peripheral device
- The second connector refers to the USB port on the ClickShare Hub
Examples:
- USB V3 C-to-A → USB‑C (device) to USB‑A (Hub)
- USB V3 C-to-C → USB‑C (device) to USB‑C (Hub)
- USB V2 B-to-A → USB‑B (device) to USB‑A (Hub)

This document applies to ClickShare Hub firmware 4.2.2 and above.

Bundles certified for Microsoft Teams

The following devices are part of a ClickShare Hub bundle that is certified for Microsoft Teams.

🔗 ClickShare Hub ecosystem - Barco

	device firmware	peripheral connection^*
Sennheiser TeamConnect Bar S	2.0.2	USB V3 C-to-A USB V3 C-to-C

Sennheiser TeamConnect Bar M	2.0.2	USB V3 C-to-A USB V3 C-to-C

Huddly C1	2.0.0	USB V3 C-to-A USB V3 C-to-C
Limitations:	Microphone mute state is not reflected on the device status led. The USB‑C cable included with the Huddly camera is a USB 2.0 + DisplayPort (DP) hybrid cable. The ClickShare Hub requires a USB 3.0–compatible USB‑C cable to function correctly.
Logitech MeetUp 2	2.0.70	USB V3 C-to-A USB V3 C-to-C
Limitations:	Microphone mute state is not correctly synchronized when toggled from the MeetUp 2 remote

Devices supported by Barco

The following devices have passed Barco's interoperability tests. The limitations are listed per device. If you encounter other issues when installing or using ClickShare Hub, please contact the Barco Helpdesk.

	device firmware	peripheral connection^*
Huddly Crew	2.0.1	USB V3 C-to-A USB V3 C-to-C

Jabra P50	9.3.6	USB V2 C-to-A USB V3 C-to-A
Limitations:	Microphone mute state is not correctly synchronized Loudspeaker volume change from the P50 remote is only applied when the device is active
Logitech MeetUp	1.0.272	USB V3 C-to-A USB V2 C-to-C
Limitations:	Microphone mute state is not correctly synchronized when toggled from the MeetUp remote
Logitech Rally System	1.2.143	USB V3 B-to-A
Limitations:	Microphone mute state is not correctly synchronized when toggled from the Rally remote
Poly Studio USB	2.1.2	USB V2 C-to-A USB V3 C-to-A
Limitations:	Microphone mute state is not correctly synchronized when toggled from the Studio USB remote
Poly Studio X52	4.6	USB V3 C-to-A USB V3 C-to-C
Limitations:	Microphone mute state is not correctly synchronized when toggled from the Studio X52 remote
Poly Studio V12	1.4.8	USB V3 C-to-A USB V3 C-to-C
Limitations:	Microphone mute state is not correctly synchronized when toggled from the Studio V12 remote
Shure ANIUSB Matrix	6.6.0.7	USB V2 B-to-A
Limitations:	Microphone mute state is not correctly synchronized when toggled from the ANIUSB Matrix Changing system volume on the ClickShare Hub may trigger a hearing protection warning
Shure IntelliMix P300	6.6.0.40	USB V2 B-to-A
Limitations:	Microphone mute state is not correctly synchronized when toggled from the IntelliMix P300