Are there Crestron Extron or AMX drivers or modules available for room integration of the ClickShare Base Units?

Article number: [3677] - Legacy code: [8505]

Applicable to

ClickShare developed modules to control the Barco ClickShare units via TCP/IP for Crestron, Extron and AMX equipment. These modules allow communication between room devices and ClickShare for the integration of ClickShare with existing room control equipment.

The supported functionalities are:

  • ClickShare status, version, login, IP addresses, ...
  • Display control (in/out standby)
  • Button info 

Following modules are available:

  • Crestron: available to download from Crestron Application Market

    CS moduleNote
    Barco Clickshare CS v2.0

    Works only with Crestron Device Database version earlier than 200.x.x.x

    This module works with both ClickShare CS(E) devices

    Barco Clickshare CS v4.0

    Works only with Crestron Device Database version earlier than 200.x.x.x and later

    This module works with both ClickShare CS(E) and CX devices, there is a small parameter in the module to define which generation device you're using.

    Barco Clickshare CS v4.10

    This module controls the Barco Clickshare Series wireless presentation systems (CS-series, CX-series, C-series)

    Note: This module will work with Crestron Device Database 200.01.001.00 and later

     
  • Extron: NA
  • AMX: NA

Remark: “Remote Control via API” under Services should be enabled in ClickShare Configuration page.

Properties

Last updated Jan 24, 2024