About this chapter
This chapter describes how to service the E2 Lite by replacing individual components.
13 E2 Lite Maintenance
- 13.1 E2 Lite unit Overview
- 13.2 Process Overview
- 13.3 Spare Parts Serviceable by All Users
- 13.4 Rear I/O Cards
- 13.5 Rear I/O and VPU Heatsink Fan
- 13.6 Tri-Combo Input Card Disassembly and Assembly
- 13.7 Front Cover Assembly
- 13.8 Front Brackets
- 13.9 3RU Fan Tray
- 13.10 1RU Fan Tray
- 13.11 VPU Card(s)
- 13.12 Front Panel Knob
- 13.13 Front Panel Mount
- 13.14 Front Panel Board
- 13.15 VFD Display Assembly
- 13.16 VFD Display Filter
- 13.17 Bottom Panel
- 13.18 Solid-State Memory
- 13.19 System Battery
- 13.20 CPU Module
- 13.21 Power Supply
- 13.22 System-Power Board
- 13.23 Genlock Assembly
- 13.24 USB Cable
- 13.25 USB Extension Cable
- 13.26 VFD Cable
- 13.27 Keyboard Cable
- 13.28 Genlock Cable
- 13.29 Ethernet Cable
- 13.30 3RU Fan Cable
- 13.31 1RU Fan Cable
- 13.32 Rear Rack Ears
- 13.33 Front Rack-Ears
- 13.34 Top Cover
- 13.35 Top Card Guide
- 13.36 Motherboard Fan
Simple servicing
E2 Lite is based on a modular design that ensures easy serviceability. Users can swap most of the E2 Lite components in the case of damage, without shipping the unit to a Barco service center.
Methodology
Most procedures in these chapters include multiple steps to gain access to the parts requiring service. A workflow flow chart is provided next indicating all of the procedures and their relationships. Please refer to the chart to familiarize yourself with the sequence of procedures.
ESD recommendations
The following precautions must be taken:
- Perform the Service procedures only at approved anti-static work station equipped with anti- static mat.
- At all times use a conductive wrist strap attached to a solid earth ground.
- Always discharge yourself by touching a grounded bare metal surface before coming in contact with ESD sensitive electronic.
